topic CAN messages sent from board getting lost in Model-Based Design Toolbox (MBDT) https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/CAN-messages-sent-from-board-getting-lost/m-p/1073528#M4633 <HTML><HEAD></HEAD><BODY><P>Hello!</P><P></P><P>I am working with a S32K14x board. I notice that in my CAN communication system, there are a lot of lost messages when these are&nbsp;sent from the board to CANalyzer.&nbsp;</P><P></P><P>Is there a way to avoid this? Maybe adding more MB to the TX?</P><P></P><P>Thanks in advance!</P><P>Juliana</P></BODY></HTML> Thu, 27 Aug 2020 12:04:42 GMT juliana_rojas30 2020-08-27T12:04:42Z CAN messages sent from board getting lost https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/CAN-messages-sent-from-board-getting-lost/m-p/1073528#M4633 <HTML><HEAD></HEAD><BODY><P>Hello!</P><P></P><P>I am working with a S32K14x board. I notice that in my CAN communication system, there are a lot of lost messages when these are&nbsp;sent from the board to CANalyzer.&nbsp;</P><P></P><P>Is there a way to avoid this? Maybe adding more MB to the TX?</P><P></P><P>Thanks in advance!</P><P>Juliana</P></BODY></HTML> Thu, 27 Aug 2020 12:04:42 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/CAN-messages-sent-from-board-getting-lost/m-p/1073528#M4633 juliana_rojas30 2020-08-27T12:04:42Z