The LoadPull results from ADS are different from the datasheet.

3109851909 — Mon, 04 May 2020 02:16:28 GMT

Hello All:

I want to design a Power Amplifier using MRF6S21050L. Firstly, I simulated in the software ADS. To get the optimum Sourceimpedence and Loadimpedence, I used the tool-- LoadPull in ADS. However, the results of simulation in ADS are different from the datasheet. This question had puzzled me a long time. So I simulated some other LDMOS of NXP in ADS using Loadpull. I found the results are always different from the datasheet. Have you ever met this case? Could you give me some help to solve the problem?

Thanks all,

Xiong

Re: The LoadPull results from ADS are different from the datasheet.

mariuslucianand — Mon, 04 May 2020 09:19:24 GMT

Hello 得安熊,

This community space does not cover the topic you need assistance on. Please create a new thread on the Power Management space or new NXP support case according to the following procedure: https://community.nxp.com/docs/DOC-329745

Hope this helps,

Marius

Model-Based Design Toolbox (MBDT)のトピックRe: The LoadPull results from ADS are different from the datasheet.

The LoadPull results from ADS are different from the datasheet.

Re: The LoadPull results from ADS are different from the datasheet.