Model-Based Design Toolbox (MBDT)のトピックRe: MPC5744p RevE communication problem

MPC5744p RevE communication problem

m15871781742 — Sun, 29 Dec 2019 08:33:24 GMT

Hi NXP team and fellow members,

I have recently ordered MPC5744P DevKit and received the Rev E DevKit. I tried to compile and download the code from Simulink model-based toolbox example by following the quick start guide which came with the MBD toolbox. I have successfully downloaded the code from simulink model-based toolbox example to the devkit. But a few days later , I kept getting the message prompt showing that there is a CCP communication error even though I have flash the bootloader via S32 as mentioned in the quick start guide.I have tired another PC,but the problem still can be solved.

Could you kindly guide me to solve this problem?

Thanks.

Re: MPC5744p RevE communication problem

eCarMaker — Thu, 02 Jan 2020 22:04:10 GMT

Unfortunately, I have the same problem. I couldn't find any example using the MPC5744p RevE and Matlab 2018b

Re: MPC5744p RevE communication problem

mariuslucianand — Sun, 07 Mar 2021 08:58:21 GMT

Hello @m15871781742 ‌,

The MPC5744P RevE uses another serial connected to OpenSDA than the older MPC5744P devkit. For that, another rbf must be flashed. We have a topic [1] on which we discussed that, together with another problem. If you have already flashed the rbf from [1], please change the computer usb port on which the board is connected. For other users this worked.

Also, which MBDT version are you using?

[1]https://community.nxp.com/thread/509064?commentID=1211928&et=notification.mention#comment-1211928

Hope this helps,

Marius