Model-Based Design Toolbox (MBDT)のトピックRe: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

"powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

e_bashar — Wed, 20 Nov 2019 15:04:04 GMT

Hello,

I have actually imported a generated code from Matlab to the S32 Design software by following the below form instructions:

How to export Generated Code to S32 Design Studio IDE (applicable for MBDT for MPC5744P v2.0)

But when I build the code I will get the following errors:

1. powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files

2. make: *** [subdir.mk:155: core0_intc_sw_handlers.o] Error 1
3. make: *** Waiting for unfinished jobs....

What shall I do?

Many Thanks,

Erfan

Re: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

18226635115 — Fri, 29 Nov 2019 05:16:18 GMT

Hello，Erfan，

I have been stuck by the same problem .Did you find the solution? I’d appreciate if you can share with me.

Thanks a lot.

Havry Zhang

Re: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

constantinrazva — Fri, 29 Nov 2019 07:53:54 GMT

Hello 18226635115@139.com‌, e.bashar@warwick.ac.uk‌,

Sorry for the late reply - unfortunately for the moment importing into S32DS version 2.1 does not work -- you can do it in older versions - S32DS v2017.R1 for example. We are investigation this issue, but just so you move on with your work in the meanwhile I recommend you install this version of the Design Studio.

Note: you can find S32DS for Power v 2017.R1 here .

Kind regards,

Razvan.

Re: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

e_bashar — Fri, 29 Nov 2019 17:28:29 GMT

Hello Razvan,

Thank you for your response. My problem has been solved by switching to the older version.

Regards,

Erfan

Re: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

18226635115 — Mon, 02 Dec 2019 05:04:13 GMT

Hello Razvan,

After I changed S32DS for PA from v2.1 to v 2017.R1,prombles like ''Ld error: cannot specify -o with -c, -S or -E with multiple files"disappeared,but there is a new error happened which you can see in the attachment.

Can you give me some advice to solve the problem.

I am looking forward to your reply.

Thanks very much.

Havry

Re: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

e_bashar — Mon, 02 Dec 2019 13:36:58 GMT

Hello Havry,

I think you might need to change the target processor to "generate code for E200Z4".

Project setting>C/C++ Build>Settings>Target Processor and then changing the the target processor. Also you should reselect the libraries support.

Regards,

Erfan

Re: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

18226635115 — Wed, 04 Dec 2019 04:38:39 GMT

Hello Erfan,

Thanks for you advice，I tried the method you supplied ,but it didn’t work.The same error occured again, I don’t know why.

Do you know if there are other settings I should check?

reagrds,

Havry

Re: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple files" Error

e_bashar — Mon, 09 Dec 2019 13:46:03 GMT

Hello Havry,

I am not sure. But would you mind going to Debug Configuration and checking the C/C++ Application file? You might be able to find the right file in the relevant MATLAB project folder.

Regards,

Erfan

Re: "powerpc-eabivle-gcc.exe: fatal error: cannot specify -o with -c, -S or -E with multiple fi

witekewert-b463 — Tue, 10 Jun 2025 14:37:59 GMT

For posterity who arrive here, walking through the depths of despair:
If on Windows, check that none of your project or tool installation paths contain a space. Similar issue happened with VSCode and MCUXpresso SDK 25.06.