topic Re: MBD MPC5744 CAN Receive interrupt does not work in Model-Based Design Toolbox (MBDT)

MBD MPC5744 CAN Receive interrupt does not work

fupeng — Fri, 23 Jun 2017 03:17:27 GMT

Hi all,

I used MBD mpc5744 to create a can receive model,my trigger function is to make a Led bright. I can receive model send can data, but the can receive interruput does not work.The following is my model.

trigger function model

Re: MBD MPC5744 CAN Receive interrupt does not work

Daniel_Popa — Fri, 23 Jun 2017 05:49:37 GMT

Hi fupeng‌,

Have you tried the example shipped with the Model Based Design for MPC5744P ?

The example/demo is doing the exact same thing with what you want and can be found here: {MBDToolbox Install dir}\mbdtbx_MPC574xP\mbdtbx_pnt\Examples\can_model_pnt.mdl

Please give it a try and let us know if this works. If the demo works then most likely there is a configuration issue in your model - and you could use this demo as a starting point.

Hope this will resolve your issue.

Best regards,

Daniel

Re: MBD MPC5744 CAN Receive interrupt does not work

fupeng — Fri, 23 Jun 2017 07:56:50 GMT

Hi,

This demo can work properly,Thank you very much for your reply！