topic Freemaster with MPC5744P: can not detect the board information in Model-Based Design Toolbox (MBDT)

Freemaster with MPC5744P: can not detect the board information

13226508 — Thu, 19 Sep 2019 04:01:46 GMT

Hi,everyone,

When I try to implement the " MotorControl_0_pnt.mdl ", the FreeMaster will error that "can't detect the board information"(AS shown below).But I do a little bit modify to the model, when I remove the part circled by blue, the freemaster and 5744p could communincation correctly. When I add it, the Freemaster won't work properly.

My matlab version is 2016a, and S32DS version is 2017.R1,Freemaster version is 2.0

Re: Freemaster with MPC5744P: can not detect the board information

mariuslucianand — Mon, 23 Sep 2019 10:08:17 GMT

Hello 13226508@qq.com‌,

I think your problem is related with this one https://community.nxp.com/thread/513398 so please start using our latest release or try some suggestions from that topic.

Hope this helps,

Marius

Re: Freemaster with MPC5744P: can not detect the board information

13226508 — Tue, 24 Sep 2019 09:45:23 GMT

Hi，Marius，

I did it as you said, but the problem remained unsolved.Do you have any other suggestions?

Regards,