Model-Based Design Toolbox (MBDT)中的主题 Re: MBD Toolbox V3.0 Examples run error

MBD Toolbox V3.0 Examples run error

李风heart — Mon, 25 Feb 2019 02:36:48 GMT

I reinstalled MBDTool V3.0 on my computer, also generate license.dat and put it into lic Folder, but when I run the example 'gpio_s32k14', there is something wrong like this:

I don't know how it happens, and how can I solve this?

I have restored the default MATLAB path and it doesn't work.

Thanks,

Feng

Re: MBD Toolbox V3.0 Examples run error

constantinrazva — Mon, 25 Feb 2019 09:30:43 GMT

Hello 李风heart ,

Can you open a command prompt on your computer and run the following command

vol

and tell us if the Volume Serial Number matches the one from the license file?

(this is from license.dat file)

Kind regards,

Razvan.

Re: MBD Toolbox V3.0 Examples run error

李风heart — Mon, 25 Feb 2019 10:03:23 GMT

Hi Razvan，

Thanks for your response.The Disk Serial Number is same to tle Number in lic file.

And there is another phenomenon, after I remove license.dat from lic file, the model has the same error information like this

Re: MBD Toolbox V3.0 Examples run error

constantinrazva — Mon, 25 Feb 2019 13:15:47 GMT

Hello,

Can you try for the moment the workaround proposed by hongjinzeng‌ ?

Here he says the licensing worked after setting the environmental variable LM_LICENSE_FILE to the path of his license.lic file.

Can you try this out ?

Kind regards,

Razvan.

Re: MBD Toolbox V3.0 Examples run error

李风heart — Tue, 26 Feb 2019 00:58:49 GMT

Hi Razvan，

I added the lic file to the environmental variable like this:

But the situation remains the same.

Re: MBD Toolbox V3.0 Examples run error

paulvlase — Tue, 26 Feb 2019 18:21:47 GMT

Hi,

Did you restart Matlab after you added the environment variable? If not, please restart Matlab and try again.

Re: MBD Toolbox V3.0 Examples run error

joshisr — Tue, 26 Feb 2019 23:45:59 GMT

I was facing same kinda issue, but now its resolved. Here's what I did ~

1. Followed procedures given by Constantin Razvan Chivu

But it still didn't work for me;

2. I reinstalled the NXP MBDT S32 packages on MATLAB, also generated license file again and got everything setup like before.

What I've observed is that ~ We modify the license file, try renaming it ~ which we should avoid.

Try doing step 2, I think it will fix the issue.

Re: MBD Toolbox V3.0 Examples run error

李风heart — Wed, 27 Feb 2019 02:10:46 GMT

Hi,

I reboot my machine,but it still doesn't work.

Re: MBD Toolbox V3.0 Examples run error

李风heart — Wed, 27 Feb 2019 11:02:56 GMT

Hi joshisr,

I have reinstalled MBDTool many times ,but it always have the same error, But there are some thing confused me: how to uninstall the MBDTool correctly? I just deleted the folder where it installed, are there some offical uninstall tool or method for user? Or I just need to delete the folder and install MBDTool time and time again?