Model-Based Design Toolbox (MBDT)のトピックHotFix: MBD Toolbox 3.0.0 for MPC57xx

HotFix: MBD Toolbox 3.0.0 for MPC57xx

mariuslucianand — Thu, 04 Apr 2019 15:34:16 GMT

HotFix_1: eTimer pins initialization not working properly, added support for ADC internal temperature sensor.

Problem: When using other port than PORTA on eTimer input channels, the initialization was not performed right.

Root Cause: eTimer input pins not working on other ports than PORTA.

Usage: Run MBDT_MPC57xx_patch_1.exe and enter the following path when prompted:

{YOUR_INSTALL_DIR}\NXP_MBDToolbox_MPC57xx\code
e.g.: C:\Users\my_user_name\Documents\MATLAB\Add-Ons\Toolboxes\NXP_MBDToolbox_MPC57xx\code

Most likely you will be asked if you want to overwrite some files - just click on 'Yes to All' option.

Special thanks to abhishek.kumar@chassisbrakes.com‌ for reporting the eTimer issue and requesting the ADC internal temperature support.

Re: HotFix: MBD Toolbox 3.0.0 for MPC57xx

mariuslucianand — Wed, 31 Jul 2019 08:34:01 GMT

HotFix_2: New board design (Rev E) for MPC5744P EVB

Problem: The existing Bootloader rbf file will not deploy code on the target because the UART pins were changed from PD9/PD12 to PB2/PB3

Root Cause: Hardware changed

Usage: Flash the attached .rbf bootloader on the Rev E board in order to program the board using the OpenSDA and RappId bootloader.

Special thanks to aungkm@outlook.com‌ for reporting this issue on our Community.

Re: HotFix: MBD Toolbox 3.0.0 for MPC57xx

constantinrazva — Wed, 31 Jul 2019 09:39:06 GMT

HotFix_3: CAN Receive individual masking not working as expected

Problem: When using CAN Receive block, individual masking is not enabled

Root Cause: Reset value of MCR[IRMQ] is 0 - global masking enabled;

Workaround: Update the following file:

{ROOT_DIR}\mbdtbx_mpc574x\mbdtbx_mpc574x\blocks\fcan\fcan_mpc574x_receive.tlc

which enabled individual masking for MBs.

Customer Report:

Special thanks to aungkm@outlook.com‌ for reporting this issue.

Re: HotFix: MBD Toolbox 3.0.0 for MPC57xx

constantinrazva — Wed, 09 Oct 2019 14:27:28 GMT

HotFix_4: SPI - not all CS available

Problem: Only CS0 through CS3 available

Root Cause: Oversight - some instances have 0-3, others 0-7 available.

Workaround: Update the following files:

{ROOT_DIR}\mbdtbx_mpc574x\mbdtbx_mpc574x\mbd_mpc574x_ec_toolbox.mdl

{ROOT_DIR\mbdtbx_mpc574x\mbdtbx_mpc574x\mscripts\spi\mbd_mpc574x_spi_instance_callback.p

Customer Report:

Special thanks to Abhishek Kumar for reporting this issue.

Re: HotFix: MBD Toolbox 3.0.0 for MPC57xx

constantinrazva — Wed, 09 Oct 2019 14:32:29 GMT

Cumulative patch:

As you know, we're only giving out cumulative patches for a while now - they come in the form of self-extracting zips and contain all the patches, up-to-date. A user can install at any point in time the latest patch and get all the patches from before, regardless if he had or had not installed some previous patch.

Usage:

Run MBDT_MPC57xx_patch_2.exe and enter the following path when prompted:

{YOUR_INSTALL_DIR}\NXP_MBDToolbox_MPC57xx
e.g.: C:\Users\my_user_name\Documents\MATLAB\Add-Ons\Toolboxes\NXP_MBDToolbox_MPC57xx

Note: for older versions of MATLAB, you might have the toobox installed in {ROOT}\NXP_MBDToolbox_MPC57xx\code . If you have the 'code' folder generated, you must add that path.

Most likely you will be asked if you want to overwrite some files - just click on 'Yes to All' option. This is an indicator of things going ok. If you do not get such a prompt, something is wrong with the patch / path given.

MBDT_MPC57xx_patch_2 contains:

HotFix1 - eTimer pins initialization issue
HotFix2 - RevE RBF added
HotFix3 - CAN Receive individual masking not working as expected
HotFix4 - SPI - not all CS available

As we get more fixes in, we'll update both the list and the executable file you need to install here.

Re: HotFix: MBD Toolbox 3.0.0 for MPC57xx

462150318 — Mon, 04 Nov 2019 02:30:40 GMT

Hello engineers,

I am facing a problem when i excute the code as shown in https://community.nxp.com/message/964538.

The code can be download but does not executing on MPC5744P DevKit. Is there a solution? PS : I use matlab 2018a and mbd toolbox 3.0.0.

Thanks very much and wait for your reply!