topic Re: S32K148EVB - Simulink - External Mode in Model-Based Design Toolbox (MBDT)

S32K148EVB - Simulink - External Mode

mfarag — Thu, 18 Oct 2018 07:43:20 GMT

Dear Sir/Madam,

I am trying the run the Simulink example of External Model (see photo below) on the S32K148EVB.

I am able to build the model (see image below):

When I click "connect to the target" button, I usually receive that error (see image below):

Kindly find below image of the model configurations:

Can someone help?

Thanks,

Mohammed Farag

Re: S32K148EVB - Simulink - External Mode

Daniel_Popa — Thu, 18 Oct 2018 11:12:50 GMT

Hi mfarag‌,

Someone in our team will look over this and reply you later on. A quick tip: can you try with a lower UART baud rate?

Also, are you absolutely sure the board is connected via COM Port 13 ? Just check in your Windows OS Device Manager on which COM Port the board is communicating with.

Thank you!

Daniel

Re: S32K148EVB - Simulink - External Mode

mfarag — Fri, 19 Oct 2018 07:53:12 GMT

Thanks dumitru-daniel.popa‌

Changed the COM port to the one specified by the Windows OS Device Manager and lowered the UART baud rate. It's working now