Model-Based Design Toolbox (MBDT)のトピックHow to solve the“Unable to honor user-specified priorities”Block warning？

How to solve the“Unable to honor user-specified priorities”Block warning？

liuqimin — Tue, 22 May 2018 12:23:15 GMT

Hello:

When I update my KVxx MCU model, a“Unable to honor user-specified priorities”Block warning display in diagnostic viewer. it will case a error when building this model if don't correct it. but i can't find where to chang the block priorities in related blocks.(such as ADC. Quadrature_Decoder block).who can help me?

Best regards!

Liu qimin

Re: How to solve the“Unable to honor user-specified priorities”Block warning？

Daniel_Popa — Tue, 22 May 2018 12:30:24 GMT

Hi liuqimin‌

Just right click on the Simulink block and select <Properties> You will then see the Priority field.

Please have a look here: https://community.nxp.com/message/985284?commentID=985284%23comment-985284#comment-899761 and https://community.nxp.com/message/985284?commentID=985284%23comment-985284#comment-901353 to learn more about these options.

Hope this helps!

Daniel

Re: How to solve the“Unable to honor user-specified priorities”Block warning？

liuqimin — Tue, 22 May 2018 12:55:05 GMT

Hi Daniel

Thanks your reply. it's a useful information for me. I can find it now. Because in some block ,setting this <Properties> was at parameter setting page, so i regular find it in this page.

Thanks!

Liu qimin