topic Re: modify the .mk file and .lcf file,the program can not run in Model-Based Design Toolbox (MBDT)

modify the .mk file and .lcf file,the program can not run

hongjinzeng — Wed, 31 Jan 2018 02:53:20 GMT

Hi everyone,

I use simulink generator the mpc5643l program.if I do not modify the .mk file and .lcf file,the program can run.After I modify those files,the program can not run.

First,I creat a model in the simulink by MCToolbox for mpc5643l.I upload the model file in the accessory.

Second,I build the model without any modify.Through click the build button,the elf file automatic generate.

Third,I download the .elf file to the trk-usb-mpc5643l through the S32DS for power by Executable File Importer.

Fourth,I debug the program by S32DS.In the debug interface,I click the run button.The program can run without any error.

Then I modify the MPC564xLFlash.lcf and secondtestmodel.mk file.

In the secondtestmodel.mk,the old version

the new version

In the MPC564xLFlash.lcf,the old version

the new version

Then I use the cmd to build the program.

the build successful

Then through the above method,I download the program to the board and debug the program.

In the debug process, I click the run button,after several seconds,I click the suspend button,the program run to 0x0.

I face the problem in several days.

I would appreciate it if you could solve the problem.

Re: modify the .mk file and .lcf file,the program can not run

Daniel_Popa — Thu, 01 Feb 2018 12:43:26 GMT

lukaszadrapa‌ / petervlna‌,

This issue is reported by a customer that wants to build a custom bootloader using MPC5643L. He used the Model-Based Design to generate the code and that worked. Now - he want to change the linker command file to move the code/data section to make it suitable for his bootloader. I suggested him to add this thread on MPC5xxx community to have a access to expert support on that - since here in MBDT we do not cover for such issues.

I think someone moved back the thread back to us just because of Simulink references - but ultimately the issue is about configuring the MPC5643L linker files.

Can you handle this ?

Thank you!

Daniel

Re: modify the .mk file and .lcf file,the program can not run

hongjinzeng — Sun, 11 Feb 2018 07:37:53 GMT

After I modify the -romaddr 0x00013000 -rambuffer 0x00013000,The program can run.