Model-Based Design Toolbox (MBDT)中的主题 In the s12zvm Toolbox,the hostid cause a problem again

In the s12zvm Toolbox,the hostid cause a problem again

hongjinzeng — Thu, 09 Nov 2017 05:30:15 GMT

Hi everyone,

When I use the motor control toolbox for s12zvm,the error is blow:

Error evaluating <a href="matlab:Simulink.internal.OpenCallbackParamsDialog(['adc'],'InitFcn');">'InitFcn'</a> callback of block_diagram '<a href="matlab:open_system ('adc')">adc</a>'.

I think the error is caused by the hostid,which in my machine is xxxxx,in others machine is xxxxxxxx.I need the new 'mcd_s12z_hostid.p' file and 'mcd_s12zvm_hostid.p' file.

Re: In the s12zvm Toolbox,the hostid cause a problem again

constantinrazva — Fri, 10 Nov 2017 13:42:54 GMT

hi zenghongjin@chegustech.com‌,

I attached here the mcd_s12zvm_hostid.p file. Before you copy the new .p file please rename the old one as mcd_s12zvm_hostid.p.old.

Please copy the mcd_s12zvm_hostid.p file into the following folder :

{Toolbox install dir}\mctbx_s12zvm\mctbx_s12zvm\mscripts\

Please let us know if you have further issues with this.

Kind regards,

Razvan.