Model-Based Design Toolbox (MBDT)のトピックRe: FreeMaster not connecting over CAN

FreeMaster not connecting over CAN

mahdkhalid — Tue, 13 Mar 2018 10:57:28 GMT

Hi Dear dumitru-daniel.popa‌

I have attached the files which I built using my compiler. Please have a look.

Many thanks in advance,

Mahd

Re: FreeMaster not connecting over CAN

Daniel_Popa — Fri, 16 Mar 2018 09:29:58 GMT

Hi Mahd,

Sorry for delay. I've checked the code you have sent me.

The main difference between you generated code and mine is in the flexcan_init_fnc() function:

Please install HotFix_6 patch in order to fix it: https://community.nxp.com/thread/451804#comment-954427

This is a cumulative patch that fix the issue.

Please confirm you have it working. FYI, these are the HW settings i've tested with:

- 12V external power supply

- 120ohm termination resistor

Hope this helps!

Daniel

Re: FreeMaster not connecting over CAN

mahdkhalid — Fri, 16 Mar 2018 12:59:39 GMT

Hi dumitru-daniel.popa‌,

Thank you so much for your help.

I have installed hotfix_6 and everything is working totally fine now

Best regards,

Mahd Khalid