FlexPWM configuration on MPC5744P

剑明肖 — Fri, 19 Jan 2018 08:28:26 GMT

Hello Marius,

This bug is fixed. Thanks for you help. But I Still find another issue at using Simple_PWM_Output modle. When two Simple_PWM_Output modles add to program, build error appears. Is This a configure constraint from toolbox? I think it's unreasonable if there are needs for more than four PWM output.

FlexPWM error Sub Module of FlexPWM block 'PWM_Demo/Simple_PWM_Output' is shared with Sub Module of another FlexPWM block

Component:聽MC Toolbox聽|聽Category:聽Block error

FlexPWM error Sub Module of FlexPWM block 'PWM_Demo/Simple_PWM_Output1' is shared with Sub Module of another FlexPWM block.

In addition, is it possible to use some of RTOS in program with using MBDT? How can I do that if possible?

Best regargs,

Jianming

Re: FlexPWM configuration on MPC5744P

Daniel_Popa — Fri, 19 Jan 2018 10:18:51 GMT

Hello,

That works as design - to prevent configuration issues. Imagine what would happen if in the first block made a specific configuration an then you change it in the second block.

If you wish to use more PWM outputs from the same module you could use the Three_Phase_PWW_output.

Hope this helps!

Daniel

topic FlexPWM configuration on MPC5744P in Model-Based Design Toolbox (MBDT)

FlexPWM configuration on MPC5744P

Re: FlexPWM configuration on MPC5744P