CAN Recevier issue

剑明肖 — Wed, 17 Jan 2018 03:35:31 GMT

Hi,

I run the CAN demo (can_model_pnt.mdl) in MBDT toolbox(MBDToolbox\mbdtbx_MPC574xP\mbdtbx_pnt\Examples), it works well. But when I add another CAN_Receive_Data_Trigger(configured the different message id) block into the program, the CAN can not receive messages. Are there anyone met the same issue? Why this happen and how to fix it?

Attach is my simulink program.

Re: CAN Recevier issue

mariuslucianand — Wed, 17 Jan 2018 14:58:39 GMT

Hello 剑明肖,

Thank you for reporting this issue.

I think this is caused by a toolbox bug, so I prepared a fix for this.

Please try replacing the following files with the ones attached, but before that please make a backup for the existing ones.

{Toolbox install dir}\mbdtbx_MPC574xP_2.0\mbdtbx_pnt\src\mbdtbx_pnt\src\c_library folder flexcan_pnt_library.c file

{Toolbox install dir}\mbdtbx_MPC574xP_2.0\mbdtbx_pnt\mbdtbx_pnt\blocks\can folder can_pnt_receive_data_trigger.tlc file

Please give us a feedback after you replaced the files.

Best regards,

Marius

topic Re: CAN Recevier issue in Model-Based Design Toolbox (MBDT)

CAN Recevier issue

Re: CAN Recevier issue