Model-Based Design Toolbox (MBDT)のトピックRe: MBD example on DEVKIT-MPC5744P Board

MBD example on DEVKIT-MPC5744P Board

gaokai — Tue, 12 Dec 2017 15:16:38 GMT

Hello,

I have a DEVKIT-MPC5744P Board and download MBDToolboxMPC574xPReleaseV2.0.0. The matlab version is 2015b.

S32 version is S32DS_Power_Win32_v2017.R1_b171019. I complie an example test_pnt.mdl. and test_pnt.elf is built at last. Then download this file to DEVKIT-MPC5744P through BAM. Then test the signal on the pin A0 A1 by oscilloscope. I found nothing. I don't know why.

Re: MBD example on DEVKIT-MPC5744P Board

Daniel_Popa — Tue, 12 Dec 2017 15:22:01 GMT

Hi gaokai‌,

Most likely you need to apply this patch https://community.nxp.com/thread/451804#comment-916493

The toolbox was release before the S32DS version you are pointing and there are changes in the GCC Linker.

Hope it helps!

Daniel

Re: MBD example on DEVKIT-MPC5744P Board

gaokai — Tue, 12 Dec 2017 15:43:48 GMT

Hi, Daniel,

Thank you. I will have a try later.

I have anthor question. I can not see the mbd for 574xp in the simulink library browser. I have add the path.

Re: MBD example on DEVKIT-MPC5744P Board

Daniel_Popa — Tue, 12 Dec 2017 15:52:52 GMT

Hi gaokai‌,

Please try this: https://community.nxp.com/message/941909?commentID=941909%23comment-941909#comment-911873

Hope it helps!

Daniel