Model-Based Design Toolbox (MBDT)のトピックRe: How to use Rappid bootloader with S12ZVML-MINIBRD kit ? https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-use-Rappid-bootloader-with-S12ZVML-MINIBRD-kit/m-p/635642#M131 <HTML><HEAD></HEAD><BODY><P>Hi Maciek,</P><P></P><P>&nbsp;&nbsp;&nbsp;Try to rest the board after writing the rbf, using the reset switch or by removing the power supply.</P><P>&nbsp;&nbsp;&nbsp;Press 'OK' button in less than 5 seconds.</P><P></P><P>Regards,</P><P>Radu</P></BODY></HTML> Fri, 11 Nov 2016 14:40:59 GMT raduivan 2016-11-11T14:40:59Z How to use Rappid bootloader with S12ZVML-MINIBRD kit ? https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-use-Rappid-bootloader-with-S12ZVML-MINIBRD-kit/m-p/635641#M130 <HTML><HEAD></HEAD><BODY><P>I've flashed S12ZVM.rbf file into the board (and configured COM port and 'download after build' in model Configuration parameters). When I'm trying to build and download Simulink model into the board - I get the following error message:&nbsp;'CCP Communication Error. Loss Communicatin with CCP MCU. Please cycle power and try again."&nbsp;</P><P>How to slove this problem - I want to check PIL with this kit ?</P><P>Does the Rappid bootloader work with UART1 (which is accessible via USB on this board) ?</P><P></P><P>Thanks</P><P>Maciek&nbsp;</P></BODY></HTML> Mon, 07 Nov 2016 21:12:45 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-use-Rappid-bootloader-with-S12ZVML-MINIBRD-kit/m-p/635641#M130 Maciek 2016-11-07T21:12:45Z Re: How to use Rappid bootloader with S12ZVML-MINIBRD kit ? https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-use-Rappid-bootloader-with-S12ZVML-MINIBRD-kit/m-p/635642#M131 <HTML><HEAD></HEAD><BODY><P>Hi Maciek,</P><P></P><P>&nbsp;&nbsp;&nbsp;Try to rest the board after writing the rbf, using the reset switch or by removing the power supply.</P><P>&nbsp;&nbsp;&nbsp;Press 'OK' button in less than 5 seconds.</P><P></P><P>Regards,</P><P>Radu</P></BODY></HTML> Fri, 11 Nov 2016 14:40:59 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/How-to-use-Rappid-bootloader-with-S12ZVML-MINIBRD-kit/m-p/635642#M131 raduivan 2016-11-11T14:40:59Z