Model-Based Design Toolbox (MBDT)のトピックRe: S32K144 download error

S32K144 download error

hongjinzeng — Thu, 19 Jan 2017 08:22:49 GMT

Hi everyone,

Today,I use RAppID BL Tool download the program into the S32K144,I connect the TXD to PTA2，RXD to PTA3.

After use S32DS flash the SK144_Bootloader.rbf

then I click the Debug

After I power off the mcu.

Then I open RAppID BL Tool download the program.

After I click Start Boot Loa,the window is blank.

Re: S32K144 download error

raduivan — Fri, 20 Jan 2017 10:05:31 GMT

Hi Hongjin,

Did you tried to power off the board after you flashed the rbf? I used the following steps and worked:

1. Program the rbf using DS, like you mentioned.

2. Power off the board.

3. Open the Boot Loader, load the configuration for S32K, see below the screenshot.

4. Reset the board using the rest button.

5. Start Boot Loader.

Regards,

Radu

Re: S32K144 download error

hongjinzeng — Sat, 21 Jan 2017 04:44:23 GMT

After I click the 'start boot loa' button,the RAppID BL Trace Window is always show Init and erasing.Then the error is display.

Re: S32K144 download error

raduivan — Mon, 23 Jan 2017 09:56:22 GMT

Hi Hongjin,

Please update the speed field to 115200 not 14400. That is the default speed used by the BootLoader.

Best regards,

Radu

Re: S32K144 download error

hongjinzeng — Mon, 23 Jan 2017 13:03:59 GMT

No matter how to set the speed,the RappID BL Window Trace Window show init and erasing.Then I use S32DS flash the elf file,but I find a problem when I power off the MCU,then I power on the MCU,the MCU would delay 5 seconds.How to reduce the time?

Re: S32K144 download error

raduivan — Mon, 23 Jan 2017 14:01:32 GMT

Hi,

You can set the delay time using the "Download Config" panel.

Regards,

Radu

Re: S32K144 download error

fengwang — Wed, 22 Feb 2017 02:55:33 GMT

Hello Radu,

I do it follow you :

1. Program the rbf using DS, like you mentioned.

2. Power off the board.

3. Open the Boot Loader, load the configuration for S32K, see below the screenshot.

4. Reset the board using the rest button.

5. Start Boot Loader.

But I occur issue ,like this :

If the error is about the "status " in the "RAppID BL Tool " down.

thanks

Regards,

Feng

Re: S32K144 download error

fengwang — Wed, 22 Feb 2017 12:20:50 GMT

Hi Hongjin,

I have the trouble like as you ,how did you to solve this error , I need you help ,please !

thank you very much

Regards,

Feng

Re: S32K144 download error

raduivan — Wed, 22 Feb 2017 12:30:03 GMT

Hi Feng,

If you use the OpenSDA you don't need the rbf, to check the OpenSDA drive open "My Computer", for example in my case is D.

Regards,

Radu

Re: S32K144 download error

fengwang — Wed, 22 Feb 2017 13:10:36 GMT

Hi Radu，

I am so sorry , i can't understand " OpenSDA drive name" you said . This is my computer like this :

my OpenSDA drive in here

I change the OpenSDA drive name:C ,the error is alway here .

I am sorry , i have try to solve this error all day , i can't find a way to slove this error .

could you tell me what i can do for this .

many many many thanks

Regards,

Feng

Re: S32K144 download error

raduivan — Wed, 22 Feb 2017 13:48:06 GMT

Hi Feng,

I the screenshot you sent I don't see the OpenSDA drive, can you please send a screenshot of your device manager with the COM ports?

If you don't want to use OpenSDA you can configure the Toolbox to automatically download the application through Bootloader by selecting the Serial as Download interface, also Enable BAM Request and set the correct COM port. Please the settings I used below. Also don't forget to first write the rbf file.

Let me know if this scenario works for you.

Best regards,

Radu

Re: S32K144 download error

fengwang — Wed, 22 Feb 2017 14:28:23 GMT

Hi Radu,

This is my manager with the COM ports of OpenSDA drive:

I have a try the second way you said. It's OK , I am so lucky , thanks to much .

But i connect FreeMaster with the board. it occur the error again ,

Re: S32K144 download error

raduivan — Wed, 22 Feb 2017 14:34:41 GMT

Hi Feng,

The Speed must be the same as the one configured in Toolbox, please see FreeMASTER config. This example uses 57600 baud rate.

Regards,

Radu

Re: S32K144 download error

fengwang — Wed, 22 Feb 2017 14:54:36 GMT

Hi Radu，

I am so lucky , You are right , It's ok .

Thank you too much in my heart !

Regards,

Feng

Re: S32K144 download error

hongjinzeng — Wed, 22 Feb 2017 15:00:12 GMT

my QQ is 944712961...

Re: S32K144 download error

fengwang — Thu, 23 Feb 2017 07:06:00 GMT

Hi Radu，

I want to learn BLDC control with S32K144，but I can't find a demo like this :

Could you tell me where can I find it ?

thanks you !

Regards,

Feng

Re: S32K144 download error

raduivan — Thu, 23 Feb 2017 07:38:00 GMT

Hi Feng,

Please create a separated discussion and close this one. Mark the previous answer as correct.

Regards,

Radu

Re: S32K144 download error

nishalemos — Wed, 12 May 2021 03:21:57 GMT

@hongjinzeng

I am even facing the same issue.

If you have resolved it could you please guide me.

I have uploaded the RBF file provided in MATLAB toolbox for UART0 CAN0.(with S32k144)

Baud Rate :115200.

But I always get Loss of Communication CPP Error.

Regards

Nisha Lemos