topic Re: S32K344 MBD CAN in Model-Based Design Toolbox (MBDT)

S32K344 MBD CAN

fletcher1244 — Tue, 14 Oct 2025 16:12:24 GMT

Hello,

I would like to develop CAN Receive Project for the S32K344 using the S32DS Config Tool + simulink（MBD ）. I tried the example in MBDT, but after programming, it did not achieve the functionality I desired. Could you please advise how I should configure MCAL and the application layer model? I would greatly appreciate detailed steps.

Thank you very much!

Re: S32K344 MBD CAN

dragostoma — Mon, 22 Dec 2025 15:15:47 GMT

Hi, @fletcher1244,

A detailed step-by-step guide on how to communicate over the CAN bus can be found here: Communicating over the CAN Bus

I recommend you installing and using the latest S32K3 release (version 1.8.0 - NXP Model-Based Design Toolbox for S32K3 version 1.8.0).

Best regards,

Dragos