topic Re: Motor Control Class: Lecture 1 - Introduction in Model-Based Design Toolbox (MBDT)

Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Mon, 15 May 2017 05:56:22 GMT

We start this course with this introduction video that present the hardware we will work with throughout this series.

Main topics:

- MPC5744P DevKit main hardware features;

- MotorGD DevKit main hardware features;

- How to install the Model Based Design Toolbox for MPC5744P revision 2.0.0;

- How to generate a license;

- How to setup a compiler toolchain using S32 Design Studio for Power Architecture;

- How to add the Model Based Design Toolbox for MPC5744P into the Simulink Standard Libraries;

- How to validate the software installation by generation C code for the first time;

Objectives:

- Understand the hardware setup;

- Download and Install the Model Based Design Toolbox for MPC5744P;

- Generate a license for the toolbox;

- Configure the toolbox and generate code for the first time;

Watch the introduction video and leave your comments and questions below.

(view in My Videos)

Additional information:

- Model Based Design Toolbox for MPC5744P Installer: here

- MPC5744P DevKit – Product Home Page: here

- MotorGD DevKit – Product Home Page: here

- MPC5744P DevKit – Quick Start Guide: here

- MPC5744P – Product Home Page: here

- MPC5744P – Reference Manual: here

- MPC5744P – Fact Sheet: here

- MPC5744P – Data Sheet: here

- MC34GD3000 – Data Sheet: here

- BUK7K52-60E – Data Sheet: here

- S32DS for PA (e200 core) – Download Link: here

- PDF attached with main peripherals that we are going to use for motor control

NOTE: Chinese viewers can watch the video on YOUKU using this link.

注意：中国观众可以使用此链接观看YOUKU上的视频

Re: Motor Control Class: Lecture 1 - Introduction

bruceye — Mon, 15 May 2017 10:52:23 GMT

Hello ,

Somehow I cannot watch this video , does anyone has the same problem as I do ? Do I need to use some particular browsers?

Thank you

Bruce

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Mon, 15 May 2017 10:54:26 GMT

Hi lezhou ye,

I'm sorry to hear that. It works fine with Chrome and IE. What kind of browser are you using?

Best regards,
Daniel

Re: Motor Control Class: Lecture 1 - Introduction

bruceye — Tue, 16 May 2017 01:15:02 GMT

HI Daniel ,

I tried Chrome and IE but with no help .The screen turned out to be like this :

Thank you for your reply.

Bruce

Re: Motor Control Class: Lecture 1 - Introduction

dsytj88 — Tue, 16 May 2017 03:06:46 GMT

Hello,I see the course is available,but unfornatuately the video is not visible,is there any add-ins necessary?

or any sollution?Thank you and expect your feedback.

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Tue, 16 May 2017 04:01:58 GMT

Hi Bruce,

Can you try with this link: Video Link : 7692

Just in case it does not work, you have the option to download the video and watch it offline with any video viewer.

Hope this will resolver your issue.

Best regards,
Daniel

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Tue, 16 May 2017 04:07:02 GMT

Hi David,

No other add-ins should be necessary. Can you see any other videos on this site? Like this one for example: Video Link : 7526

If nothing works then i'll report your issue to site administrator.

Thanks for your understanding!

Best regards,
Daniel

Re: Motor Control Class: Lecture 1 - Introduction

dsytj88 — Tue, 16 May 2017 06:52:15 GMT

Hello,Daniel

I tried your link but it's not working.

may you please inform the admin person to resolve it?

Thank you

Best regards

David

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Tue, 16 May 2017 07:20:41 GMT

David,

Can you try to download and install the video and audio codecs for MP4 format? You can try this package: Media Player Codec Pack for Microsoft Windows

Hope this helps!

Daniel

Re: Motor Control Class: Lecture 1 - Introduction

dsytj88 — Tue, 16 May 2017 09:18:04 GMT

Daniel

sorry，even there is one button for download by your provided link,after clicking download button,

the file could be only saved as text format and finally downloading is failed.

if the file can be downloaded,then everything will be fine.

Best regards

david

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Tue, 16 May 2017 09:36:02 GMT

David,

It might be something specific to your PC setup. We checked with other PCs from intranet and extranet and the site works OK. Also, i checked the logs and looks like other peoples can see it. Could it be something from your internet service provider ?

Best regards,

Daniel

Re: Motor Control Class: Lecture 1 - Introduction

elite_lee — Wed, 17 May 2017 11:35:43 GMT

Daniel,

I can't see the video too. The situation likes David :smileycry:. could you offer a link that i can download the video, because i can download the class's attachmet like the PDF.

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Wed, 17 May 2017 11:53:04 GMT

Hi Sun et .all with video issues,

Can you try this link please: https://community.nxp.com/download-video!execute.jspa?videoID=7692

You should see this page that allows you to download the video and see it offline.

If the issue will persists we will consider moving the video to YOUTUBE

Thanks for your understanding!

Best regards,
Daniel

Re: Motor Control Class: Lecture 1 - Introduction

bruceye — Thu, 18 May 2017 01:15:59 GMT

Hi Daniel,

It is okay to download the video from your link but really slowly ,it seems that it will take me more than 10 hours.

Best regards
Bruce

Re: Motor Control Class: Lecture 1 - Introduction

paul_xu — Thu, 18 May 2017 01:38:12 GMT

Hi Daniel,

I tried all the download link you have provided. It seems doesn`t work. As you know we can`t see the video on the YouTube without VPN, So it`s not convenient in China.

If there is a way to share more related training data for download like PPT, so we can join the class in this way.

Thanks for your support!

Paul Xu

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Thu, 18 May 2017 08:06:38 GMT

Question for users within China mainland: as you can see in the threads above the Videos might not work in your country due to filtering/firewall. Do you know any Chinese YouTube like video hosting platform that we could use the make the videos available for Chinese viewers.

Please leave a reply and we will consider all suggestions as a possible alternative.

Thank you!

Daniel

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Thu, 18 May 2017 08:08:34 GMT

Hi Paul,

Thanks for your feedback. For the next videos i'm going to add more power point slides and will make them available for download.

Anyhow, at the end of the series a full PDF will all the slides will become available as well.

Best regards,

Daniel

Re: Motor Control Class: Lecture 1 - Introduction

paul_xu — Thu, 18 May 2017 08:47:07 GMT

Hi Daniel,

If you can try to upload the video to http://www.youku.com/ or https://v.qq.com. We usually use these websites to view the videos in China.

Thanks for your support!

Paul Xu

Re: Motor Control Class: Lecture 1 - Introduction

Daniel_Popa — Sun, 21 May 2017 09:29:17 GMT

For Chinese users,

I tried to follow Paul Xu suggestion and use youku or qq to make the videos available for China mainland but unfortunately Youku gives me an error when i'm trying to bind my phone number to upload the videos, while QQ does not sent me the SMS with the code to upload the video.

We are not going to abandon the idea of making the videos available to you - I'll contact NXP China Sales and Marketing Office to see how can we resolve this ASAP. Till then keep in touch and try to download the low resolution videos from our community or if you have possibility use a VPN.

Thank for your understanding and patience!

Best regards,
Daniel

Re: Motor Control Class: Lecture 1 - Introduction

paul_xu — Sun, 21 May 2017 12:38:47 GMT

Hi Daniel，

I have already got the videos from NXP China Marketing Terry who is based in Shanghai.

Thanks a lot for your help!

Paul