https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/DataMemRead-and-DataMemWrite-on-k358bmu-MBDT/m-p/2108692#M10268 <P>Hello everyone,</P><P>I'm currently working with the K358BMU using MBDT, and I'm trying to figure out how to store values in the onboard flash memory.</P><P>Specifically, I need to retain the State of Charge (SoC), so that it remains available even after reset.</P><P>If anyone has experience with flash memory access or data retention techniques in MBDT for this MCU, your guidance would be greatly appreciated. And if anyone has a working example, kindly share it—it would be extremely helpful!</P> Mon, 02 Jun 2025 14:04:15 GMT MReza 2025-06-02T14:04:15Z https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/DataMemRead-and-DataMemWrite-on-k358bmu-MBDT/m-p/2108692#M10268 <P>Hello everyone,</P><P>I'm currently working with the K358BMU using MBDT, and I'm trying to figure out how to store values in the onboard flash memory.</P><P>Specifically, I need to retain the State of Charge (SoC), so that it remains available even after reset.</P><P>If anyone has experience with flash memory access or data retention techniques in MBDT for this MCU, your guidance would be greatly appreciated. And if anyone has a working example, kindly share it—it would be extremely helpful!</P> Mon, 02 Jun 2025 14:04:15 GMT https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/DataMemRead-and-DataMemWrite-on-k358bmu-MBDT/m-p/2108692#M10268 MReza 2025-06-02T14:04:15Z