LPCXpresso IDE中的主题 IDE V6/V5 Debugger USB peripheral view Issues https://community.nxp.com/t5/LPCXpresso-IDE/IDE-V6-V5-Debugger-USB-peripheral-view-Issues/m-p/546398#M9669 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by MikeSimmonds on Fri Sep 27 01:29:22 MST 2013</STRONG><BR /><SPAN>Firstly, the USB view does NOT show the OHCI registers!</SPAN><BR /><SPAN>This makes debugging my host application rather difficult.</SPAN><BR /><SPAN>I had to write code to copy these registers to a 'dump' region.</SPAN><BR /><BR /><SPAN>The USB setup registers (on LPC1778) has upto 5 separate clocks to enable.</SPAN><BR /><BR /><SPAN>Unless ALL of these clocks are selected, the USB peripheral view 'collapses'</SPAN><BR /><SPAN>complaining about an access violation at 2008C204.</SPAN><BR /><SPAN>Also, a memory view on the register space (2008C000) shows '??'s even when</SPAN><BR /><SPAN>all clocks are enabled.</SPAN><BR /><SPAN>NB: Code that reads individual (appropriate) USB registers works perfectly.</SPAN><BR /><BR /><SPAN>This is increadibly sloppy. Depending on the application, we configure for</SPAN><BR /><SPAN>one of device, host, or OTG.</SPAN><BR /><BR /><SPAN>There should be separate USB view for these cases (to avoid usless clutter)</SPAN><BR /><SPAN>and they should be viewable when only the relevant clocks are enabled.</SPAN><BR /><BR /><SPAN>Comments please.</SPAN><BR /><SPAN>Regards, Mike</SPAN></BODY></HTML> Thu, 16 Jun 2016 00:32:54 GMT lpcware 2016-06-16T00:32:54Z IDE V6/V5 Debugger USB peripheral view Issues https://community.nxp.com/t5/LPCXpresso-IDE/IDE-V6-V5-Debugger-USB-peripheral-view-Issues/m-p/546398#M9669 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by MikeSimmonds on Fri Sep 27 01:29:22 MST 2013</STRONG><BR /><SPAN>Firstly, the USB view does NOT show the OHCI registers!</SPAN><BR /><SPAN>This makes debugging my host application rather difficult.</SPAN><BR /><SPAN>I had to write code to copy these registers to a 'dump' region.</SPAN><BR /><BR /><SPAN>The USB setup registers (on LPC1778) has upto 5 separate clocks to enable.</SPAN><BR /><BR /><SPAN>Unless ALL of these clocks are selected, the USB peripheral view 'collapses'</SPAN><BR /><SPAN>complaining about an access violation at 2008C204.</SPAN><BR /><SPAN>Also, a memory view on the register space (2008C000) shows '??'s even when</SPAN><BR /><SPAN>all clocks are enabled.</SPAN><BR /><SPAN>NB: Code that reads individual (appropriate) USB registers works perfectly.</SPAN><BR /><BR /><SPAN>This is increadibly sloppy. Depending on the application, we configure for</SPAN><BR /><SPAN>one of device, host, or OTG.</SPAN><BR /><BR /><SPAN>There should be separate USB view for these cases (to avoid usless clutter)</SPAN><BR /><SPAN>and they should be viewable when only the relevant clocks are enabled.</SPAN><BR /><BR /><SPAN>Comments please.</SPAN><BR /><SPAN>Regards, Mike</SPAN></BODY></HTML> Thu, 16 Jun 2016 00:32:54 GMT https://community.nxp.com/t5/LPCXpresso-IDE/IDE-V6-V5-Debugger-USB-peripheral-view-Issues/m-p/546398#M9669 lpcware 2016-06-16T00:32:54Z