LPCXpresso IDEのトピックRe: CRP problem https://community.nxp.com/t5/LPCXpresso-IDE/CRP-problem/m-p/540104#M6791 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by NXP_USA on Fri Jul 08 11:55:20 MST 2011</STRONG><BR /><SPAN>Please see application note below:</SPAN><BR /><BR /><A href="http://">http://ics.nxp.com/support/documents/microcontrollers/zip/an10851.zip</A><BR /><BR /><SPAN>Keep in mind that debug capability is lost after CRP1 is enabled.</SPAN><BR /><SPAN>Thanks.</SPAN></BODY></HTML> Thu, 16 Jun 2016 01:45:30 GMT lpcware 2016-06-16T01:45:30Z CRP problem https://community.nxp.com/t5/LPCXpresso-IDE/CRP-problem/m-p/540103#M6790 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by blasiis on Thu Jul 07 07:53:15 MST 2011</STRONG><BR /><SPAN>LPC1758</SPAN><BR /><SPAN>I use LPCLINK, "programm flash" buton, and the same hex file. </SPAN><BR /><SPAN>When I program the flash without any CRP, all goes correctly, the application run. </SPAN><BR /><SPAN>When I program the flash with CRP1, the application dont start !!! </SPAN><BR /><SPAN> </SPAN><BR /><SPAN>Can help me ?</SPAN></BODY></HTML> Thu, 16 Jun 2016 01:45:29 GMT https://community.nxp.com/t5/LPCXpresso-IDE/CRP-problem/m-p/540103#M6790 lpcware 2016-06-16T01:45:29Z Re: CRP problem https://community.nxp.com/t5/LPCXpresso-IDE/CRP-problem/m-p/540104#M6791 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by NXP_USA on Fri Jul 08 11:55:20 MST 2011</STRONG><BR /><SPAN>Please see application note below:</SPAN><BR /><BR /><A href="http://">http://ics.nxp.com/support/documents/microcontrollers/zip/an10851.zip</A><BR /><BR /><SPAN>Keep in mind that debug capability is lost after CRP1 is enabled.</SPAN><BR /><SPAN>Thanks.</SPAN></BODY></HTML> Thu, 16 Jun 2016 01:45:30 GMT https://community.nxp.com/t5/LPCXpresso-IDE/CRP-problem/m-p/540104#M6791 lpcware 2016-06-16T01:45:30Z