ARM7 Debug options using LPCXpresso

lpcware — Wed, 15 Jun 2016 23:00:40 GMT

Content originally posted in LPCWare by leojose on Mon Nov 18 00:51:01 MST 2013
It is clear that LPCLink2 will not support ARM7 or ARM9 -http://www.lpcware.com/content/faq/lpcxpresso/lpc-link2-support

Although not mentioned anywhere, I assume the older LPCLink also does not support ARM7 and ARM9

But LPCXpresso IDE v6 supports ARM7/9, but it only support LPCLink debuggers.

So what are the options for somebody who wants to use LPCXpresso as an IDE for ARM7/ARM9?

LPCXPresso IDE -> ?Debugger? -> ARM7/9

Re: ARM7 Debug options using LPCXpresso

lpcware — Wed, 15 Jun 2016 23:00:41 GMT

Content originally posted in LPCWare by lpcxpresso-support on Mon Nov 18 01:25:17 MST 2013
For ARM7/9 debug with the LPCXpresso IDE, you need to either use the original LPC-Link (ie a separated LPCXpresso board) or a Red Probe+.

Regards,
LPCXpresso Support

topic ARM7 Debug options using LPCXpresso in LPCXpresso IDE

ARM7 Debug options using LPCXpresso

Re: ARM7 Debug options using LPCXpresso