topic LPC55S16 - Flash IAP in LPCXpresso IDE

LPC55S16 - Flash IAP

Dhaya — Sat, 11 Nov 2023 06:59:27 GMT

We used the IAP Flash concept to store the data in our customised board. In some boards it works properly. But in some of the board, it not executed while entering the function of flash property controller get hanged. How can i resolve this issue. Here by I updated the code we generated

#include "fsl_iap.h"

#include "fsl_iap_ffr.h"

#include "init.h"

#define PAGE_INDEX_FROM_END 1U

flash_config_t flashInstance;

static uint32_t status;

uint32_t destAdrss; /* Address of the target location */

uint32_t failedAddress, failedData;

uint32_t pflashBlockBase = 0;

uint32_t pflashTotalSize = 0;

uint32_t pflashSectorSize = 0;

uint32_t PflashPageSize = 0;

void IAP_Flashwrite(void);

void IAP_Flashread(void);

void IAP_Address_cap(void);

int main()

{

IAP_Address_cap();

void IAP_Flashwrite(void);

IAP_Flashread();

while(1)

{

}

void IAP_Address_cap()

{

FLASH_Init(&flashInstance);

/* Get flash properties kFLASH_ApiEraseKey */

FLASH_GetProperty(&flashInstance, kFLASH_PropertyPflashBlockBaseAddr, &pflashBlockBase);

FLASH_GetProperty(&flashInstance, kFLASH_PropertyPflashSectorSize, &pflashSectorSize);

FLASH_GetProperty(&flashInstance, kFLASH_PropertyPflashTotalSize, &pflashTotalSize);

FLASH_GetProperty(&flashInstance, kFLASH_PropertyPflashPageSize, &PflashPageSize);

destAdrss = pflashBlockBase + (pflashTotalSize - (PAGE_INDEX_FROM_END * PflashPageSize));

}

void IAP_Flashwrite(void)

{

static uint8_t status;

status = FLASH_Erase(&flashInstance, destAdrss, PflashPageSize, kFLASH_ApiEraseKey);

status = FLASH_VerifyErase(&flashInstance, destAdrss, PflashPageSize);

/* Start programming specified flash region */

status = FLASH_Program(&flashInstance, destAdrss, (uint8_t *)IAP_data_buffer, sizeof(IAP_data_buffer));

// /* Verify if the given flash region is successfully programmed with given data */

// status = FLASH_VerifyProgram(&flashInstance, destAdrss, sizeof(Write_byte),

// (const uint8_t *)Write_byte, &failedAddress, &failedData);

}

void IAP_Flashread(void)

{

destAdrss = pflashBlockBase + (pflashTotalSize - (PAGE_INDEX_FROM_END * PflashPageSize));

/* Verify programming by reading back from flash directly */

for (uint32_t i = 0; i < 64; i++)

{

IAP_data_buffer[i] = *(volatile uint32_t *)(destAdrss + i * 4); //IAP_data_buffer

}

Re: LPC55S16 - Flash IAP

Alice_Yang — Tue, 14 Nov 2023 07:51:25 GMT

Hello @Dhaya

How about first use SDK demo "flashiap1" to test ?

Alice

Re: LPC55S16 - Flash IAP

Dhaya — Sat, 18 Nov 2023 10:59:49 GMT

Hi @Alice_Yang ,

No its not working fine. It shows the following error while debug SDK example project without edit.

IAP_flashiap1 LinkServer Debug [C/C++ (NXP Semiconductors) MCU Application]

IAP_flashiap1.axf [LPC55S16 (cortex-m33)]

Thread #1 1 (Suspended : Signal : SIGSTOP:Stopped (signal))

HardFault_Handler() at semihost_hardfault.c:53 0x2618

<signal handler called>() at 0xfffffff9

_printf() at 0x21a0

main() at iap_flash.c:58 0x2ce

arm-none-eabi-gdb (12.1.90.20221210)

Re: LPC55S16 - Flash IAP

Dhaya — Sun, 19 Nov 2023 04:29:37 GMT

We use Keil IDE which having the following configuration of RAM and ROM

Re: LPC55S16 - Flash IAP

Alice_Yang — Fri, 24 Nov 2023 10:01:07 GMT

Hello @Dhaya

Is your board custom board or demo board?

Can you confirm whether it can debug simple hello world demo well?

There is no issue with this demo, I have tested on my demo board.

Alice

Re: LPC55S16 - Flash IAP

Dhaya — Sat, 25 Nov 2023 05:50:09 GMT

We using our custom board.

Re: LPC55S16 - Flash IAP

Alice_Yang — Mon, 27 Nov 2023 07:25:38 GMT

Hello @Dhaya

Can you confirm whether it can debug simple hello world demo well?

Alice