LPCXpresso IDEのトピックHow to run LPCpresso54608

How to run LPCpresso54608

実奥山 — Thu, 21 Dec 2017 05:20:13 GMT

When I biuld demo sample "lpcxpresso54608_demo_apps_touch_cursor" and

run(run as/run configuration/run) on MCUXpresso ,the error occured.

Comment is"" Launching lpcxpresso54608_demo_apps_touch_cursor.axf(1) has encountered a problem.

Error starting process"

Debug probe(micro B) of LPCpresso54608 board is connected with PC in USB cable.

Re: How to run LPCpresso54608

実奥山 — Thu, 21 Dec 2017 07:27:48 GMT

The above problem was settled by using "start debugging project..."

Next I tried "lpcxpress54608_demo_apps_lwip_lwip_httpsrv_bm".

I connected my borad to PC with cat5 cable.

But PC IE could not open httpserver(192.168.0.102).

Isn't the MAC address initialized?

Can I have advice?

Re: How to run LPCpresso54608

lpcxpresso_supp — Fri, 05 Jan 2018 08:46:36 GMT

If you are using MCUXpresso IDE, I suggest that you start off by reading the supplied User Guide which gives a good overview of importing, building and then debugging projects. If you have further issues, then I would suggest posting them to the MCUXpresso IDE forum : MCUXpresso IDE .

For hardware / software configuration issues LPC5460x, you might also consider the LPC and the SDK forums :

https://community.nxp.com/community/lpc

MCUXpresso SDK

Regards,

LPCXpresso IDE Support