LPCXpresso IDEのトピックUART design https://community.nxp.com/t5/LPCXpresso-IDE/UART-design/m-p/596833#M31982 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by tbelo on Tue Apr 02 02:32:37 MST 2013</STRONG><BR /><SPAN>Hi,</SPAN><BR /><SPAN>My project uses LPC1115 and serial GSM module.</SPAN><BR /><BR /><SPAN>Requirements:</SPAN><BR /><SPAN>UART communication with "AT" commands and response acknowldge,</SPAN><BR /><SPAN>Need to receive and manipulate GPRS data,</SPAN><BR /><SPAN>dont use RTOS.</SPAN><BR /><BR /><SPAN>What is recommended for UART communication between MCU and GSM?</SPAN><BR /><SPAN>Polling</SPAN><BR /><SPAN>Interrupt TX and/or RX</SPAN><BR /><SPAN>Circular RX and TX buffer </SPAN><BR /><SPAN>....</SPAN><BR /><BR /><SPAN>Thanks in advance.</SPAN><BR /><SPAN>Theodore</SPAN></BODY></HTML> Wed, 15 Jun 2016 23:00:57 GMT lpcware 2016-06-15T23:00:57Z UART design https://community.nxp.com/t5/LPCXpresso-IDE/UART-design/m-p/596833#M31982 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by tbelo on Tue Apr 02 02:32:37 MST 2013</STRONG><BR /><SPAN>Hi,</SPAN><BR /><SPAN>My project uses LPC1115 and serial GSM module.</SPAN><BR /><BR /><SPAN>Requirements:</SPAN><BR /><SPAN>UART communication with "AT" commands and response acknowldge,</SPAN><BR /><SPAN>Need to receive and manipulate GPRS data,</SPAN><BR /><SPAN>dont use RTOS.</SPAN><BR /><BR /><SPAN>What is recommended for UART communication between MCU and GSM?</SPAN><BR /><SPAN>Polling</SPAN><BR /><SPAN>Interrupt TX and/or RX</SPAN><BR /><SPAN>Circular RX and TX buffer </SPAN><BR /><SPAN>....</SPAN><BR /><BR /><SPAN>Thanks in advance.</SPAN><BR /><SPAN>Theodore</SPAN></BODY></HTML> Wed, 15 Jun 2016 23:00:57 GMT https://community.nxp.com/t5/LPCXpresso-IDE/UART-design/m-p/596833#M31982 lpcware 2016-06-15T23:00:57Z