topic Re: LPC1113 Board Bring Up Issue in LPCXpresso IDE https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596275#M31729 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Ex-Zero on Fri Sep 09 15:36:49 MST 2011</STRONG><BR /><HR /><SPAN style="color: #0000ff;"><STRONG>Quote: xfirex</STRONG><BR />Is there any hardware configurations...</SPAN><HR /><BR /><BR /><SPAN>No :)</SPAN><BR /><BR /><SPAN>If it's new it's starting in ISP mode with 12 MHz Internal RC oscillator (IRC) .</SPAN></BODY></HTML> Wed, 15 Jun 2016 21:34:24 GMT lpcware 2016-06-15T21:34:24Z LPC1113 Board Bring Up Issue https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596274#M31728 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by xfirex on Fri Sep 09 15:22:56 MST 2011</STRONG><BR /><SPAN>Is there any hardware configurations needed to bring up my LPC1113 board with the chip directly from factory and never been programmed before? I'd pull-up both PIO0_0 (RESET) and PIO0_1 pins but I measured there is no frequency over the XTALIN pin.</SPAN></BODY></HTML> Wed, 15 Jun 2016 21:34:23 GMT https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596274#M31728 lpcware 2016-06-15T21:34:23Z Re: LPC1113 Board Bring Up Issue https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596275#M31729 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Ex-Zero on Fri Sep 09 15:36:49 MST 2011</STRONG><BR /><HR /><SPAN style="color: #0000ff;"><STRONG>Quote: xfirex</STRONG><BR />Is there any hardware configurations...</SPAN><HR /><BR /><BR /><SPAN>No :)</SPAN><BR /><BR /><SPAN>If it's new it's starting in ISP mode with 12 MHz Internal RC oscillator (IRC) .</SPAN></BODY></HTML> Wed, 15 Jun 2016 21:34:24 GMT https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596275#M31729 lpcware 2016-06-15T21:34:24Z Re: LPC1113 Board Bring Up Issue https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596276#M31730 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by xfirex on Sun Sep 11 14:07:45 MST 2011</STRONG><BR /><SPAN>Where can I measure the IRC clock?</SPAN></BODY></HTML> Wed, 15 Jun 2016 21:34:24 GMT https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596276#M31730 lpcware 2016-06-15T21:34:24Z Re: LPC1113 Board Bring Up Issue https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596277#M31731 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Ex-Zero on Sun Sep 11 14:11:16 MST 2011</STRONG><BR /><SPAN>As it's name says: Internal :eek:</SPAN></BODY></HTML> Wed, 15 Jun 2016 21:34:25 GMT https://community.nxp.com/t5/LPCXpresso-IDE/LPC1113-Board-Bring-Up-Issue/m-p/596277#M31731 lpcware 2016-06-15T21:34:25Z