topic 16: target error from status-poll: Ee(4c) Fatal error in LPCXpresso IDE https://community.nxp.com/t5/LPCXpresso-IDE/16-target-error-from-status-poll-Ee-4c-Fatal-error/m-p/596222#M31709 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Vyshali on Thu Mar 05 01:24:11 MST 2015</STRONG><BR /><SPAN>While debugging my code using the LPC Link 2 board connected to my target, if I don't set a breakpoint and run my code I get 16: Target error from status-poll, ACK fault, if I set breakpoints to investigate, I get 16: target error from status-poll: Ee(4c) fatal error, after hitting a breakpoint. I have changed the debug board and the USB cable, I still get the same issue. If I run the code without debugger, the code doesn't crash, everything is fine. I don't understand why executing on the debugger causes issue. Any help?</SPAN></BODY></HTML> Wed, 15 Jun 2016 21:37:05 GMT lpcware 2016-06-15T21:37:05Z 16: target error from status-poll: Ee(4c) Fatal error https://community.nxp.com/t5/LPCXpresso-IDE/16-target-error-from-status-poll-Ee-4c-Fatal-error/m-p/596222#M31709 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Vyshali on Thu Mar 05 01:24:11 MST 2015</STRONG><BR /><SPAN>While debugging my code using the LPC Link 2 board connected to my target, if I don't set a breakpoint and run my code I get 16: Target error from status-poll, ACK fault, if I set breakpoints to investigate, I get 16: target error from status-poll: Ee(4c) fatal error, after hitting a breakpoint. I have changed the debug board and the USB cable, I still get the same issue. If I run the code without debugger, the code doesn't crash, everything is fine. I don't understand why executing on the debugger causes issue. Any help?</SPAN></BODY></HTML> Wed, 15 Jun 2016 21:37:05 GMT https://community.nxp.com/t5/LPCXpresso-IDE/16-target-error-from-status-poll-Ee-4c-Fatal-error/m-p/596222#M31709 lpcware 2016-06-15T21:37:05Z Re: 16: target error from status-poll: Ee(4c) Fatal error https://community.nxp.com/t5/LPCXpresso-IDE/16-target-error-from-status-poll-Ee-4c-Fatal-error/m-p/596223#M31710 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by lpcxpresso-support on Thu Mar 05 01:38:53 MST 2015</STRONG><BR /><SPAN>See this FAQ:</SPAN><BR /><SPAN><A class="jive-link-external-small" href="https://community.nxp.com/external-link.jspa?url=http%3A%2F%2Fwww.lpcware.com%2Fcontent%2Ffaq%2Flpcxpresso%2Fregaining-debug-access" rel="nofollow" target="_blank">http://www.lpcware.com/content/faq/lpcxpresso/regaining-debug-access</A></SPAN></BODY></HTML> Wed, 15 Jun 2016 21:37:06 GMT https://community.nxp.com/t5/LPCXpresso-IDE/16-target-error-from-status-poll-Ee-4c-Fatal-error/m-p/596223#M31710 lpcware 2016-06-15T21:37:06Z