LPCXpresso IDEのトピックRe: lpc4357 and jtag

lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:25 GMT

Content originally posted in LPCWare by salamlora1 on Sat Mar 22 03:52:51 MST 2014
Hi
I have a open43xxe2 + core43xxe2 and want to work with jtag but i can’t set the jtag for download and debugging in the lpcexpresso
I can do all of this work in the IAR easily but the lpcexpresso are a little confusing me can anyone can help me? :((

Re: lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:26 GMT

Content originally posted in LPCWare by lpcxpresso-support on Sat Mar 22 07:23:59 MST 2014
There are a number of FAQs on working with LPC43 parts with LPCXpresso - with a good starting point being:

http://www.lpcware.com/content/faq/lpcxpresso/lpc18-lpc43-support

If you need further help, please clarify exactly what you are trying to do.

Regards,
LPCXpresso Support

Re: lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:27 GMT

Content originally posted in LPCWare by salamlora1 on Sun Mar 23 06:14:15 MST 2014
[color=#f30]really ?!!!!!!![/color]
:O :((

PatrickT

Beginner

Date of registration: Jan 22nd 2014

Posts: 1

1
Thursday, January 30th 2014, 5:58pm
How do I setup LPCXpresso for use with my J-Link?How do I setup LPCXpresso for use with my J-Link? I thought LPCXpresso worked through GDB and I could simply use SEGGER's GDB server. When trying this I get

No compatible emulator available

Do I have to change the port within LPCXpresso somehow? Go to the top of the page
--------------------------------------------------------------------------------

SEGGER - Alex

Super Moderator

Date of registration: Dec 18th 2007

Posts: 1,113

2
Thursday, February 6th 2014, 7:46pm
Hi Patrick,

Quoted I thought LPCXpresso worked through GDB and I could simply use SEGGER's GDB server

Unfortunately this is not the case. LPCXpresso currently uses a more or less proprietary interface which is based on GDB in general but does not allow generic/vanilla GDB connections to third party GDBServers.
So currently, you cannot use J-Link with LPCXpresso due to lack of support from the IDE side.

- Alex

address : http://www.forum.segger.com/index.php?page=Thread&threadID=1728

Re: lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:27 GMT

Content originally posted in LPCWare by lpcxpresso-support on Sun Mar 23 08:05:45 MST 2014
If you are using LPCXpresso v7, you can now use jlink from segger. See this FAQ from segger
http://www.segger.com/nxp-lpcxpresso.html

Re: lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:28 GMT

Content originally posted in LPCWare by salamlora1 on Mon Mar 24 09:16:47 MST 2014
Hi thx for your help
I do all of things says in that address
But I have problem!
I can’t run the jtag ?
The messages are in the picture

Re: lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:28 GMT

Content originally posted in LPCWare by lpcxpresso-support on Mon Mar 24 11:35:16 MST 2014

Please note LPCXpresso support of this GDB server solution is the responsibility of Segger.

Regards,

LPCXpresso-Support

Re: lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:29 GMT

Content originally posted in LPCWare by TheFallGuy on Mon Mar 24 12:24:19 MST 2014
It really doesn't matter how you answer the question, but I would suggest you press No (and check the Remember my decision box).

Re: lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:30 GMT

Content originally posted in LPCWare by salamlora1 on Fri Apr 04 23:11:09 MST 2014
Hi
I’m again
I find a way to run the debugger
1-Build the project
2 – Download the bin file with another program (most of the programmers take an checksum error wen want to download the lpcexpresso bin file)
3 – Run the lpcexpresso debugger
(I have IAR and Keil both of them can program and debug with jtag please give me a solution)

Re: lpc4357 and jtag

lpcware — Thu, 16 Jun 2016 02:47:30 GMT

Content originally posted in LPCWare by lpcxpresso-support on Sat Apr 05 05:51:19 MST 2014
Please explain what you problem is? Are you trying to use J-Link? If so, read the faq at:
http://www.segger.com/nxp-lpcxpresso.html