LPC1769 Configure Clock?

lpcware — Wed, 15 Jun 2016 22:49:36 GMT

Content originally posted in LPCWare by belskyc on Thu Mar 21 17:11:28 MST 2013
Hello,
Really basic question. On the LPC1769, I'm trying to setup the clock such that:
CCLK = OSC_CLK. Here's the initializing code I tried:

LPC_SC->CLKSRCSEL &= ~(0x00000003); // sysclk = osc_clk: Setup External Oscillator = 12Mhz.
LPC_SC->CLKSRCSEL |= (0x00000001);
LPC_SC->PLL0CON &= ~(0x00000003); // pllclk = sysclk: Disable and bypass PLL.
LPC_SC->CCLKCFG &= ~(0x000000FF); // cclk = pllclk = sysclk: Clock Divide = 1.

When I try to run on the LPCXpresso LPC1769 demo board, the debugger crashes. However, if I comment out this and rely on register defaults for the clock (using the IRC - Internal RC Oscillator), it runs.

Does anyone see what I'm missing or have any examples on simple configurations of the clock?

Thanks much,
~

Re: LPC1769 Configure Clock?

lpcware — Wed, 15 Jun 2016 22:49:37 GMT

Content originally posted in LPCWare by Ex-Zero on Thu Mar 21 19:51:16 MST 2013
Your code is switching to main clock (= crystal) without problem

Unfortunately you've forgotten to start main clock

 LPC_SC->SCS       =  (1<<5);            //enable main oscillator bit 5
 while ((LPC_SC->SCS & (1<<6)) == 0);/* Wait for Oscillator to be ready    */

This is starting your crystal circuit at XTAL1/2 and waiting until it's ready

All this is doing CMSIS (if enabled) for you in SystemInit() of system_LPC17xx.c

LPCXpresso IDE中的主题 LPC1769 Configure Clock?

LPC1769 Configure Clock?

Re: LPC1769 Configure Clock?