topic Re: Want to change the uIP page in LPCXpresso IDE

Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:54 GMT

Content originally posted in LPCWare by natwar on Fri Mar 15 05:05:48 MST 2013
[SIZE=6][SIZE=4][/SIZE]Hello friends.
I am programming on [B]RDB1768cmsis2_uIP[/B](uIP programming in LPC1768). I can successfully communicate with my Board and my PC.I am getting output in net browser also
But now I want to change the page and want to create/modify the page.
I got that for modification I have to make changes in [B]httpd-fsdata.c[/B] file. But I am not getting how get that array.
Please give the solution.
I think this is html to .hex conversion. Please suggest the solution.[/SIZE]

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:55 GMT

Content originally posted in LPCWare by whitecoe on Fri Mar 15 07:19:48 MST 2013
Did you try reading the 'readme.txt' file inside the project itself ? :rolleyes:

Quote:
If required, the webpage contents can be modified. To do this, change
the appropriate files in the \apps\webserver\httpd-fs subdirectory of
the project. You will then need to process these files into the data
files that get built into the executable. To do this, run the PERL
program "makefsdata" \apps\webserver.

HTH :D

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:56 GMT

Content originally posted in LPCWare by natwar on Fri Mar 15 23:38:54 MST 2013
[SIZE=5]But Sir may I know how to do that in [U]PERL[/U]? [/SIZE]

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:56 GMT

Content originally posted in LPCWare by ex-kayoda on Sat Mar 16 03:41:31 MST 2013
#1 Download an install Perl http://www.activestate.com/activeperl/downloads or http://www.perl.org/get.html

#2 Change makefsdata to makefsdata.pl

#3 Double click makefsdata.pl

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:57 GMT

Content originally posted in LPCWare by natwar on Sun Mar 17 23:58:21 MST 2013
[SIZE=5]But how to change contents of [B][U]httpd-fsdata.c[/U][/B] file.
If possible plz send me snapshots of this.[/SIZE]

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:57 GMT

Content originally posted in LPCWare by serge on Mon Mar 18 00:15:01 MST 2013
Can you please reduce your fontsize?

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:58 GMT

Content originally posted in LPCWare by natwar on Wed Mar 20 05:37:27 MST 2013
ok, but tell me how to do this?
"But how to change contents of httpd-fsdata.c file.
If possible plz send me snapshots of this."

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:59 GMT

Content originally posted in LPCWare by whitecoe on Wed Mar 20 06:30:15 MST 2013
Oh come on - have you actually tried following the instructions that you have already been provided with ? :mad:

1) Modify the files in the "httpd-fs" subdirectory.
2) Then run the perl script to regenerate the source files used in the actual project built, based on the changes you have made in httpd-fs subdirectory.

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:06:59 GMT

Content originally posted in LPCWare by natwar on Thu Mar 21 05:47:16 MST 2013
Hey listen what I have done.
Firstly I took one html file from internet eg. xyz.com and downloaded that page.
then all the downloaded contents are copied into [B]httpd-fs[/B] folder.
Then modified [B]makefsdata[/B] file to [B]makefsdata.pl[/B].
Then ran the program and downloaded but still coming that previous page of Code Red.
Please, give me solution.
I think I am doing something wrong, but not getting what to do.

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:07:00 GMT

Content originally posted in LPCWare by ppx on Fri Mar 22 03:47:42 MST 2013
What you are doing is right but remember to compile your program afterwards to include the new data. BTW, on the TI page there is a makefs.exe which I believe is compatible with the Perl version but it doesn't need Perl.

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:07:00 GMT

Content originally posted in LPCWare by natwar on Fri Mar 22 06:39:16 MST 2013
I have compiled my program but it is showing same previous web page...

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:07:01 GMT

Content originally posted in LPCWare by ppx on Mon Mar 25 03:21:27 MST 2013
Take a look at this part from the Stellaris readme file and be sure that you are in the directory where your html files are or one directory higher. After verify the time stamp of the dot h file.

If you change the web pages you must "compile" them to a ".h" file using:
./makefsfile -i fs -o fsdata-s2e.h -r -h
Be carefull, this program take all the files in the fs directory, be sure not
to have any backup up files or hidden Window things like thumbs.db
You can test the web pages locally but the data in the tables is updated with
Java so you will only see it after installing the application.

After this you must recompile the application with make and install it.

I have been using "gcc version 4.4.1 (Sourcery G++ Lite 2009q3-68)" under
Cygwin.

This is for Stellaris (TI) version of makefsfile but I believe the syntax is very similar for the Perl script becuse they say that is is based on the Perl script.

Re: Want to change the uIP page

lpcware — Wed, 15 Jun 2016 23:07:02 GMT

Content originally posted in LPCWare by natwar on Fri Apr 19 02:08:26 MST 2013
Hello [B]ppx[/B]!!!
I have downloaded and copied makefsfile.exe in [B]G:\Ethernet\RDB1768cmsis2_uIP\apps\webserver[/B]
above location and then i wrote the command [B]makefsfile -i fs -o fsdata-s2e.h -r -h [/B] in command prompt.

Command prompt shows following :
makefsfile - Generate a file containing a file system image.
Copyright <c> 2008 etc...
Completed successfully.0 files from 1 directory processed
Binay size 0 <0x00000000> bytes

and then what to do?
I want to know more about "gcc version 4.4.1 (Sourcery G++ Lite 2009q3-68)" under Cygwin.

How to do this??
Plz help!!!!!!!!!!!!!!!