Getting Started Tips

lpcware — Wed, 15 Jun 2016 22:43:23 GMT

Content originally posted in LPCWare by bobi-one on Wed Jun 09 08:45:55 MST 2010
Hi, I'm fairly new to the embedded systems. I understand basic things about MCU and have experience with Atmel chips. I recently got the LPCxpresso board and i really like to learn the ARM mcu's with this board.
I will be grateful if u can share some sites or docs which will help me learn arm mcu's from scratch.
(sorry for my English : ))

Re: Getting Started Tips

lpcware — Wed, 15 Jun 2016 22:43:23 GMT

Content originally posted in LPCWare by CodeRedSupport on Thu Jun 10 01:28:25 MST 2010
A good starting point for learning about MCUs would be

http://en.wikipedia.org/wiki/Microcontroller
http://en.wikipedia.org/wiki/Embedded_system

[though the usual warnings about wikpedia content apply]

Googling for 'ARM MCU' will throw up lots of other sites for you to explore too.

For more specific information start at:

http://ics.nxp.com/lpcxpresso/
http://ics.nxp.com/products/lpc1000/
http://www.arm.com/products/processors/cortex-m/index.php

You might also want to consider this book....

The Definitive Guide to the ARM Cortex-M3, Second Edition (Paperback) by Joseph Yiu
http://www.amazon.com/Definitive-Guide-ARM-Cortex-M3-Second/dp/185617963X/ref=sr_1_1?ie=UTF8&s=books&qid=1276158119&sr=1-1

Regards,
CodeRedSupport

LPCXpresso IDEのトピックRe: Getting Started Tips

Getting Started Tips

Re: Getting Started Tips