https://community.nxp.com/t5/LPCXpresso-IDE/Device-not-started-after-power-reconnect/m-p/582387#M25403 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Testdrive on Sun Mar 09 08:47:22 MST 2014</STRONG><BR /><SPAN>Hi!</SPAN><BR /><SPAN>I have any problem. My device basic on LPC1788. I am work with Keil. Beefor this my board connect to PC with ULINK2. it's correct work all ( flashing and debug ). Now connect by JetLink.</SPAN><BR /><SPAN>So, my problem:</SPAN><BR /><SPAN>If I am load flash in LPC1788 with press button "Load" and after make hard reset - all work. But if after flash disconnect power and connect power new - LPC1788 not work correctly.</SPAN><BR /><SPAN>I this hard reset not help me... Please, I need any idea.</SPAN><BR /><SPAN>Thx, Pavel.</SPAN></BODY></HTML> Thu, 16 Jun 2016 01:20:19 GMT lpcware 2016-06-16T01:20:19Z https://community.nxp.com/t5/LPCXpresso-IDE/Device-not-started-after-power-reconnect/m-p/582387#M25403 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Testdrive on Sun Mar 09 08:47:22 MST 2014</STRONG><BR /><SPAN>Hi!</SPAN><BR /><SPAN>I have any problem. My device basic on LPC1788. I am work with Keil. Beefor this my board connect to PC with ULINK2. it's correct work all ( flashing and debug ). Now connect by JetLink.</SPAN><BR /><SPAN>So, my problem:</SPAN><BR /><SPAN>If I am load flash in LPC1788 with press button "Load" and after make hard reset - all work. But if after flash disconnect power and connect power new - LPC1788 not work correctly.</SPAN><BR /><SPAN>I this hard reset not help me... Please, I need any idea.</SPAN><BR /><SPAN>Thx, Pavel.</SPAN></BODY></HTML> Thu, 16 Jun 2016 01:20:19 GMT https://community.nxp.com/t5/LPCXpresso-IDE/Device-not-started-after-power-reconnect/m-p/582387#M25403 lpcware 2016-06-16T01:20:19Z