LPCXpresso IDEのトピックRe: USB communications https://community.nxp.com/t5/LPCXpresso-IDE/USB-communications/m-p/572738#M21136 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by CodeRedSupport on Sat Mar 27 13:46:35 MST 2010</STRONG><BR /><SPAN>The LPCXpresso's debug USB connection is dedicated to debug, you cannot use it for your own purposes.</SPAN><BR /><BR /><SPAN>You need to connect to the USB pins on the LPC1343 chip itself, by either adding you own hardware, or connecting to an Embedded Artists LPCXpresso baseboard. </SPAN><BR /><BR /><SPAN>I would suggest a good starting place for more information would be the two LPC1343 apps notes available from NXP's website:</SPAN><BR /><BR /><A href="http://">http://ics.nxp.com/support/documents/microcontrollers/</A><BR /><BR /><SPAN>or more directly at:</SPAN><BR /><BR /><A href="http://">http://ics.nxp.com/support/documents/microcontrollers/zip/an10905.zip</A><BR /><A href="http://">http://ics.nxp.com/support/documents/microcontrollers/zip/an10904.zip</A><BR /><BR /><SPAN>Regards,</SPAN><BR /><BR /><SPAN>CodeRedSupport</SPAN></BODY></HTML> Thu, 16 Jun 2016 02:24:30 GMT lpcware 2016-06-16T02:24:30Z USB communications https://community.nxp.com/t5/LPCXpresso-IDE/USB-communications/m-p/572737#M21135 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by Andrew24 on Sat Mar 27 11:07:40 MST 2010</STRONG><BR /><SPAN>Hallo. I 'm developing a project on LPC1343 to acquire some data from a sensor, and then send the value through the USB to computer. What is the simplest way to do this? can i use the same usb cable for communications that i use to program and debug? or do i need to use the pins USB_DM, USB_DP?</SPAN></BODY></HTML> Thu, 16 Jun 2016 02:24:29 GMT https://community.nxp.com/t5/LPCXpresso-IDE/USB-communications/m-p/572737#M21135 lpcware 2016-06-16T02:24:29Z Re: USB communications https://community.nxp.com/t5/LPCXpresso-IDE/USB-communications/m-p/572738#M21136 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by CodeRedSupport on Sat Mar 27 13:46:35 MST 2010</STRONG><BR /><SPAN>The LPCXpresso's debug USB connection is dedicated to debug, you cannot use it for your own purposes.</SPAN><BR /><BR /><SPAN>You need to connect to the USB pins on the LPC1343 chip itself, by either adding you own hardware, or connecting to an Embedded Artists LPCXpresso baseboard. </SPAN><BR /><BR /><SPAN>I would suggest a good starting place for more information would be the two LPC1343 apps notes available from NXP's website:</SPAN><BR /><BR /><A href="http://">http://ics.nxp.com/support/documents/microcontrollers/</A><BR /><BR /><SPAN>or more directly at:</SPAN><BR /><BR /><A href="http://">http://ics.nxp.com/support/documents/microcontrollers/zip/an10905.zip</A><BR /><A href="http://">http://ics.nxp.com/support/documents/microcontrollers/zip/an10904.zip</A><BR /><BR /><SPAN>Regards,</SPAN><BR /><BR /><SPAN>CodeRedSupport</SPAN></BODY></HTML> Thu, 16 Jun 2016 02:24:30 GMT https://community.nxp.com/t5/LPCXpresso-IDE/USB-communications/m-p/572738#M21136 lpcware 2016-06-16T02:24:30Z