Problems with altering counter match value witin the ISR

lpcware — Wed, 15 Jun 2016 23:46:02 GMT

Content originally posted in LPCWare by JSalisbury on Thu May 12 08:26:20 MST 2011
Hi,
I am useing a 16 bit counter to count incoming pulses and trigger interupt on count = match value. I would like to be able to change the match value within the ISR, what is the safe way of doing this.

I have tried the code shown but I do sometimes get errors such as
" Single stepping until exit from function __write,
which has no line number information. when single stepping"

Thanks

/******************************************************************************
** Function name:        reset_timer
**
** Descriptions:        Reset timer
**
** parameters:            timer number: 0 or 1
** Returned value:        None
**
******************************************************************************/
void reset_timer16(uint8_t timer_num)
{
uint32_t regVal;

if ( timer_num == 0 )
{
    regVal = LPC_TMR16B0->TCR;
    regVal |= 0x02;
    LPC_TMR16B0->TCR = regVal;
}
else
{
    regVal = LPC_TMR16B1->TCR;
    regVal |= 0x02;
    LPC_TMR16B1->TCR = regVal;
}
return;
}

void TIMER16_1_IRQHandler(void)
{
    /*
     * adc_data_buff 0=x 1=y 2=Z
     */
    int i;
    int curr_ch;
    uint32_t local_v;

if ( LPC_TMR16B1->IR & 0x1 )
         {
      SSP_Receive( 1,debug_rx_buff_local, 3 ); //perform read regardless if the data is needed reduce jitter
          switch (counter_control)
          {
          case reset_adc:
        TESTPIN_1_ON;
          SYNC_N_HIGH;
          drdy_count = ADC_BURST_LIM;
          counter_control=adc_drdy_wait;
          MUX_0_LOW;
          MUX_1_LOW;
        LPC_TMR16B1->MR0    = DRDY_LONG ; // these lines can cause lockup
    reset_timer16 (ADC_COUNTER); // these lines can cause lockup
        LPC_TMR16B1->IR = 1;
          break;
}
return;
}

Re: Problems with altering counter match value witin the ISR

lpcware — Wed, 15 Jun 2016 23:46:02 GMT

Content originally posted in LPCWare by JSalisbury on Mon May 16 01:29:36 MST 2011
Problem solved,
trying to single step DBPRINTF gives strange results.

topic Problems with altering counter match value witin the ISR in LPCXpresso IDE

Problems with altering counter match value witin the ISR

Re: Problems with altering counter match value witin the ISR