topic Re: EA baseboard Dual UART ?? in LPCXpresso IDE https://community.nxp.com/t5/LPCXpresso-IDE/EA-baseboard-Dual-UART/m-p/566906#M18663 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by serge on Mon Apr 23 23:37:56 MST 2012</STRONG><BR /><SPAN>Just do a search on this forum and you will find a I2C driver, should be easy to port to your µC. If i'm not mistaken it was written by Rob65.</SPAN><BR /><SPAN>:D</SPAN></BODY></HTML> Thu, 16 Jun 2016 00:57:29 GMT lpcware 2016-06-16T00:57:29Z EA baseboard Dual UART ?? https://community.nxp.com/t5/LPCXpresso-IDE/EA-baseboard-Dual-UART/m-p/566905#M18662 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by jaybee on Mon Apr 23 22:28:39 MST 2012</STRONG><BR /><SPAN>Hi,</SPAN><BR /><BR /><SPAN>I am trying to use the rs232 port on the EA baseboard, but it is not connected directly to a UART but via a dual UART IC SC16IS752 using I2C. I read the SC16IS752 datasheet and could not get any idea how to set data so it will output as UART signal before going to the level shifter.</SPAN><BR /><BR /><SPAN>Are there any examples that does this? I have no experience in using I2C devices</SPAN><BR /><BR /><SPAN>Please advise :)</SPAN></BODY></HTML> Thu, 16 Jun 2016 00:57:28 GMT https://community.nxp.com/t5/LPCXpresso-IDE/EA-baseboard-Dual-UART/m-p/566905#M18662 lpcware 2016-06-16T00:57:28Z Re: EA baseboard Dual UART ?? https://community.nxp.com/t5/LPCXpresso-IDE/EA-baseboard-Dual-UART/m-p/566906#M18663 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by serge on Mon Apr 23 23:37:56 MST 2012</STRONG><BR /><SPAN>Just do a search on this forum and you will find a I2C driver, should be easy to port to your µC. If i'm not mistaken it was written by Rob65.</SPAN><BR /><SPAN>:D</SPAN></BODY></HTML> Thu, 16 Jun 2016 00:57:29 GMT https://community.nxp.com/t5/LPCXpresso-IDE/EA-baseboard-Dual-UART/m-p/566906#M18663 lpcware 2016-06-16T00:57:29Z