topic Re: 'MFlash4' overflowed by 280 bytes in LPCXpresso IDE

'MFlash4' overflowed by 280 bytes

lpcware — Wed, 15 Jun 2016 22:21:03 GMT

Content originally posted in LPCWare by HammingBird on Mon May 23 04:43:01 MST 2016
its solved..

Re: 'MFlash4' overflowed by 280 bytes

lpcware — Wed, 15 Jun 2016 22:21:03 GMT

Content originally posted in LPCWare by lpcxpresso-support on Mon May 23 05:30:31 MST 2016
This error means that the amount of data (the compiled binary) allocated to the flash called MFlash4 was 280 bytes larger than the size of MFlash4.

Please take a look at the FAQ for further information.

https://www.lpcware.com/content/faq/lpcxpresso/debug-build-too-big-fit-flash

Regards,

LPCXpresso-support

Re: 'MFlash4' overflowed by 280 bytes

lpcware — Wed, 15 Jun 2016 22:21:04 GMT

Content originally posted in LPCWare by HammingBird on Tue May 24 02:12:59 MST 2016
Hallo,
Thanks for the info.

sorry to say, it doesn't work. I installed the ** Latest version of LPCXpresso IDE : v8.1.4 **
and try to optimize the code, but could not able to remove the error.

the error says, < region 'MFlash4' overflowed by 400 bytes >

I am using the prog "LPC8xx ROM API". you can find it here

https://www.lpcware.com/content/forum/lpc8xx-rom-api

and my main prog is attached here also.

I appreciate your help.

Thanks

Re: 'MFlash4' overflowed by 280 bytes

lpcware — Wed, 15 Jun 2016 22:21:05 GMT

Content originally posted in LPCWare by vtw.433e on Tue May 24 10:19:36 MST 2016
It means your code (and its initialized data) is too large to fit in flash. You will need to change your program to make it fit.

Re: 'MFlash4' overflowed by 280 bytes

lpcware — Wed, 15 Jun 2016 22:21:05 GMT

Content originally posted in LPCWare by HammingBird on Wed May 25 17:52:52 MST 2016
Thanks for the info.

I tried with "Release" (after optimize the code). it goes with "Release".. But the problem with "Release " is , it has no '.hex' file.

I am using the prog "LPC8xx ROM API", its here :

https://www.lpcware.com/content/forum/lpc8xx-rom-api

This prog only has '.hex' file for "Debug". I did copy the '.hex' file from "Debug" and paste it in "Release", but does not work.

how can I make a ".hex" file in my "Release " folder ?

Re: 'MFlash4' overflowed by 280 bytes

lpcware — Wed, 15 Jun 2016 22:21:06 GMT

Content originally posted in LPCWare by R2D2 on Wed May 25 23:46:28 MST 2016

Quote: HammingBird
how can I make a ".hex" file in my "Release " folder ?

FAQ:

https://www.lpcware.com/content/faq/lpcxpresso/image-checksums

Re: 'MFlash4' overflowed by 280 bytes

lpcware — Sun, 19 Jun 2016 01:11:35 GMT

bump