LPCXpresso IDE中的主题 Re: Debug Error

Debug Error

lpcware — Thu, 16 Jun 2016 00:50:39 GMT

Content originally posted in LPCWare by Ex-Zero on Fri Dec 04 05:25:17 MST 2009
Hi all,
just received my new LPCXpresso, but after importing and building LPCXpresso1343_blinky example clicking "Debug 'LPCXpresso1343_blinky' (Debug)" in Quickstart panel "Initializing LPC-Link..." stops while "Checking Emulator" and shows
"LPCXpresso:Error
Error received while booting LPC-Link:
Timeout waiting for LPC-Link initialization: Timeout for LPC-Link drivers to load"
after a few seconds.
Of course I checked my USB cable and USB Device Driver in Vista. LED2 of the target board is flashing 2 times every second, but I'm not able to start debugging.
Any suggestions are welcome,
Zero

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:40 GMT

Content originally posted in LPCWare by NXP_USA on Fri Dec 04 12:05:44 MST 2009
Hi Zero,
Does the LPCXpresso board show up in the Device Manager?

It should be listed as "USB Device with DFU Capabilities" under "Universal Serial Bus controllers."

If it does not show up, it could be that the driver did not get installed- when plugging in the LPCXpresso for the first time, click "Install driver automatically." Also, is your PC running a 32-bit, or a 64-bit version of windows? Currently LPCXpresso runs only on 32-bit Windows XP, Windows Vista, and Windows 7.

Let me know if this information helps.

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:41 GMT

Content originally posted in LPCWare by Ex-Zero on Fri Dec 04 17:04:58 MST 2009
Hi NXP-USA,
thanks for your reply. The device driver in my Vista (32bit) is listed. Just tested my Laptop (XP), same Problem. After reading 'Getting started' a dozen times I'm not sure how to check 'LPC-Link'.
[ATTACH]2[/ATTACH]

TIA,
Zero

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:41 GMT

Content originally posted in LPCWare by NXP_USA on Sun Dec 06 12:43:07 MST 2009
We have identified a compatibility problem with LPCXpresso and some other USB programs that run background monitoring processes such as digital camera tray icons. We expect to release an updated version of LPCXpresso that fixes this within a week.

-NXP support

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:42 GMT

Content originally posted in LPCWare by TheFallGuy on Sun Dec 06 13:23:30 MST 2009
Hi Zero,

Can we step through this and check some things out. Sorry, but there are several steps here, that we need to go through to try to resolve your problem.

1. Can you tell me which OS and platform you are running on? I would also like to know the processor and clock speed of your pC. Also, are you running on a virtual machine?

2. When you connect the board it should appear in Device Manager under Universal Serial Bus Controllers as "USB Device with DFU capabilities". Can you confirm this? Also, take a note of how many "USB Input Device" entries you see under Human Interface Devices

3. Start the LPCXpresso IDE and debug an application. This will load the firmware into the LPC-Link probe. This is where you reported the error.

4. Now switch back to Device Manager and see if the LPC-Link has been successfully initialised. You should now see a new "USB Input Device" listed under Human Interface Devices.

5. If a new device does show up, then it should work successfully in LPCXpresso. Try debugging again.

6. If a new USB Input Device has not been created, this indicates that the LPC-Link failed to initialise correctly. We now need to find out why...

7. In c:\nxp\lpcxpresso\bin you will find an application called DFUAPP. Run this from the command line as:
dfuapp /s gui

8. Ensure Download is selected and Browse to find
(Windows XP) [FONT=&quot][B]LPCXpressoFS.enc, or
(Window Vista/7) LPCXpresso[/B][/FONT] [FONT=&quot][/FONT]HS.enc
(you will presented with a warning - it is OK)

9. Now press "Start Download"

10. Now check if the device has booted (See step 4).

11. If it has booted, try debugging again

Please post back your results.

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:42 GMT

Content originally posted in LPCWare by Ex-Zero on Sun Dec 06 20:15:19 MST 2009
Hi all,
first of all thanks for your replies.

@NXP_USA: Thanks for this info.

@TheFallGuy: Thanks for your help and now back to your list:

1.Vista(32bit), Athlon X2 6000+ 3GHz, 3GB RAM, Firewall:ZoneAlarm AntiVirus:Avira
[ATTACH]3[/ATTACH]

2.USB Device with DFU is installed. HID shows a single entry, my A4Tech USB Port Mouse.
[ATTACH]6[/ATTACH]

3.Start LPCXpressso, build ...blinky, debug ...blinky

4.No additional HID!

5.No debugging.

6.OK.

7.dfuapp /s gui calls what :confused: ?
[ATTACH]5[/ATTACH]

Zero

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:43 GMT

Content originally posted in LPCWare by iccy on Wed Dec 09 02:37:49 MST 2009
Hi,
I've also encounter debug error which shows "Error launching Debug\LPCxpresso1343_blinky.axf. Remote communication error: No error" . I have check thru' the Debug Configuration but found nothing wrong.

I have also done "dfuapp /s gui" and able to detect the hid, but it doesn't seem to help. Is there other configuration that I have missed out?

iccy

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:44 GMT

Content originally posted in LPCWare by CodeRedSupport on Wed Dec 09 10:19:59 MST 2009
Hi,

We think we have found the issue that is causing this problem (and Zeros). If you send an email to support at code-red-tech.com we can make a new installer available that should resolve this issue.

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:44 GMT

Content originally posted in LPCWare by Doctor N. Gin on Wed Dec 16 13:34:03 MST 2009
Hello!

I have a similar problem.
But the error message is "License check failure".
The device seems to work properly.
I've followed the steps 1 to 11.
The firmware "LPCXpressoFS.enc" is loaded because
my LPCXpresso v3.1 (lpcxpresso_3.1.2_132.exe) is installed under WindowsXP.
In addition, the software is "fully activated".

Do you know how to get along here?
Thank you for your trouble.

Yours faithfully,
Doctor N. Gin

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:45 GMT

Content originally posted in LPCWare by CodeRedSupport on Wed Dec 16 13:49:09 MST 2009
Can you provide *exact* details of the error you are getting please? That is, all of the text that is being displayed?

Thanks

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:45 GMT

Content originally posted in LPCWare by CodeRedSupport on Thu Dec 17 01:19:10 MST 2009
Hi Dr Gin,
Could you email your details to support at code-red-tech.com and somebody will deal directly with your issue. This is not a known problem, so we will need some closer interaction with you to try to resolve the problem you are having. This will be a lot quicker if we can deal with you directly, rather than through this forum.

When we resolve the issue, we will report back to this forum.

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:46 GMT

Content originally posted in LPCWare by anders@trebax on Fri Dec 18 09:12:54 MST 2009
Hi all,

Same problem here.
I get "[B]Licence check failure (CheckLicense)[/B]" when I try to debug the example blinky project.

If I try to debug a second time without dissconnecting the board or restarting LPCxpresso I also get:
[FONT=Courier New][SIZE=2]
No symbol "new" in current context.
set remotetimeout 60000[/SIZE][/FONT]

from [B]arm-none-eabi-gdb[/B] in the console window

Mail sent to Code Red.

/Anders

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:46 GMT

Content originally posted in LPCWare by CodeRedSupport on Fri Dec 18 09:56:33 MST 2009
Hi,

Can you email us at support at code-red-tech.com and we will try to get you through this.

Thanks

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:47 GMT

Content originally posted in LPCWare by Doctor N. Gin on Sat Dec 19 03:30:23 MST 2009
I have found a workaround für my problem.

First, I uninstalled the LPCXpresso v3.1 (lpcxpresso_3.1.2_132.exe).
Then I installed the old version LPCXpresso v3.0 (lpcxpresso_3.0.10_110.exe).
Now debugging works without problems.
In a second step, I have installed the new version in another directory.
Result: The old version works, the new do not (same error as before).

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:48 GMT

Content originally posted in LPCWare by domen on Sat Dec 26 10:59:34 MST 2009
I too get an "LPCXpresso: Error" dialog
with contents:
Error launching Debug\blinky.axf
License check failure (CheckLicense)

I also tried downloading firmware as described before in this thread... all worked fine, (I see the hid device in device manager) except the LPCXpresso still does not want to cooperate with me.

Operating system Windows XP pro 32-bit, all updates, installed yesterday.

Also let me bitch about this for a bit.
This is the third day I'm wasting to run the hello world app?!!
First I fought with various virtualized Windows, reinstalling them, trying different virtualization software etc. Then I carried the board to a friend with native Win XP, and it even worked, but I obviously can't just take her computer. Now I tried it at another computer at parents, and of course (!) it didn't work with 64-bit Windows, so I had to reinstall it with 32-bit, and now it still DOESN'T WORK :-(
Am I really that spoiled with non-proprietary development tools just working?!

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:48 GMT

Content originally posted in LPCWare by CodeRedSupport on Tue Dec 29 01:10:08 MST 2009
We have just released v3.1.4 that fixes the 'License check' errors reported by a number of users in this list.

To obtain this new version, visit the Downloads page on http://lpcxpresso.code-red-tech.com/LPCXpresso (login required).

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:49 GMT

Content originally posted in LPCWare by Doctor N. Gin on Tue Dec 29 12:20:06 MST 2009
great it works!

now let us find the other bugs...

… I mean in my software ;-)

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:50 GMT

Content originally posted in LPCWare by dbudurea on Thu Feb 25 15:10:02 MST 2010
Hi to everybody,

I just got my lpcxpresso board and tried it when I run into the same problems as you guys mentioned here and seemed to be fixed in version v3.1.4. This thread was indeed very helpful, especially the one that pointed that an old version worked fine.
I have tested the latest V3.2.3 and v3.2.1. Both failed. This is when I downloaded and installed (all in different folders) v3.0.10 that was proven to work and indeed it worked.
With the latest two versions I get the "No error" error. Is this back?
I have not tested v3.1.4 and v3.1.2 (yet...).
Any comments?

Thanks,
DB

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:50 GMT

Content originally posted in LPCWare by CodeRedSupport on Thu Feb 25 17:06:22 MST 2010
Last week, a Windows XP user encountered an issue where the target debug utility (in a separate process) not able to interrogate the PC in order to validate the license. For an unknown reason, the system path was not available to this process. This was worked around by[FONT=Times New Roman] adding the "C:\Windows\system32" path in the LPCXpresso IDE "Additional Path directories". From the menu:[/FONT]
[FONT=Times New Roman]Windows -> Preferences -> LPCXpresso -> Common[/FONT]

[FONT=Times New Roman]enter the "C:\Windows\system32" path in the dialog. This presumes Windows is installed on drive "C:". Otherwise, use the appropriate drive/path designation, and post your results.

Regards,

CodeRedSupport
[/FONT]

Quote: dbudurea
Hi to everybody,

I just got my lpcxpresso board and tried it when I run into the same problems as you guys mentioned here and seemed to be fixed in version v3.1.4. This thread was indeed very helpful, especially the one that pointed that an old version worked fine.
I have tested the latest V3.2.3 and v3.2.1. Both failed. This is when I downloaded and installed (all in different folders) v3.0.10 that was proven to work and indeed it worked.
With the latest two versions I get the "No error" error. Is this back?
I have not tested v3.1.4 and v3.1.2 (yet...).
Any comments?

Thanks,
DB

Re: Debug Error

lpcware — Thu, 16 Jun 2016 00:50:51 GMT

Content originally posted in LPCWare by dbudurea on Thu Feb 25 18:26:02 MST 2010
Hi,
Thank you for the quick reply but this solution does not work for me.
In the mean time I have tested v3.1.4 that is supposed to have this fixed and I get the same "No error" error as with all the other later versions.
I have gone back and forth numerous times between all newer versions and v3.0.10 and all fail while the oldest v3.0.10 works just fine.
I would not have a problem and wait for a solution but I am testing both LPC1114 and LPC1343 boards and this old version does not support the LPC1114. This path solution does not seem to affect anything.
Maybe support fo LPC1100 has caused this in all the newer versions???

I have attached a screen shot of failure while trying to debug/download using v3.2.3. While this screen shot was taken when using the LPC1114 board, the same error comes up with LPC1343.

Thanks again,
DB

Quote: CodeRedSupport
Last week, a Windows XP user encountered an issue where the target debug utility (in a separate process) not able to interrogate the PC in order to validate the license. For an unknown reason, the system path was not available to this process. This was worked around by[FONT=Times New Roman] adding the "C:\Windows\system32" path in the LPCXpresso IDE "Additional Path directories". From the menu:[/FONT]
[FONT=Times New Roman]Windows -> Preferences -> LPCXpresso -> Common[/FONT]

[FONT=Times New Roman]enter the "C:\Windows\system32" path in the dialog. This presumes Windows is installed on drive "C:". Otherwise, use the appropriate drive/path designation, and post your results.

Regards,

CodeRedSupport
[/FONT]