topic Re: LPC Link2 in LPCXpresso IDE

LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:10 GMT

Content originally posted in LPCWare by HRE Haustechnik on Tue Jun 17 04:30:46 MST 2014
Hello

when IDE is started and the LPC LInk2 is via USB cable connected the LED on LPC LINK is on. If i boot the probe or start Debug the LED goes to off and in Terminal with lsusb the name NXP hints. The Fault is Connection Exeption Reason Connection aborted.
My OS is UBUNTU 12.04 newest version. I tried many Downloads and One or Two Times it runs but not perfect.

May anyone help me with this problem

Thanks a lot in advance

Paul

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:11 GMT

Content originally posted in LPCWare by lpcxpresso-support on Tue Jun 17 05:16:47 MST 2014
Make sure you are using the latest version of LPCXpresso - v7.2.0. Also, read the Linux installation information:
http://www.lpcware.com/content/faq/lpcxpresso/linux-installation

If this does not solve your problem, please post EXACT details of what you are doing and what target you are trying to debug (debug probe, board, part etc) and how it is connected and powered to your computer.

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:11 GMT

Content originally posted in LPCWare by HRE Haustechnik on Tue Jun 17 08:01:08 MST 2014
The target is LPC1114FN 28 pin 0,1 Pitch. The connection from target to LPC Link2 is a10Pin connector to J6 (SWDIO, SWCLK, RESET, VIO_3V3ZZ, GND). The connection to the PC is standart USB cable.
The board is self powered and the board voltage is 3,28V.
From the LPCExpresso IDE User Manuell i copied the install comments in Terminal and this is the result: Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
Hinweis: »libusb-1.0-0-dev:i386« wird für regulären Ausdruck »libusb-1.0« gewählt.
Hinweis: »libusb-1.0-0:i386« wird für regulären Ausdruck »libusb-1.0« gewählt.
Hinweis: »libusb-0.1-4:i386« wird für regulären Ausdruck »libusb-0.1« gewählt.
E: Paket libpangox-1.0-0:i386 kann nicht gefunden werden cannot be found
E: Mittels regulärem Ausdruck »libpangox-1.0-0« konnte kein Paket gefunden werden no package
E: Paket libpangoxft-1.0-0:i386 kann nicht gefunden werden
E: Mittels regulärem Ausdruck »libpangoxft-1.0-0« konnte kein Paket gefunden werden
E: Paket libudev1:i386 kann nicht gefunden werden
The connections i soldered myself. They are tested and 100% ok.The Main is normal blinky with timer16

If you need anymore information please let me know. Thank you a lot.

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:12 GMT

Content originally posted in LPCWare by lpcxpresso-support on Tue Jun 17 08:41:05 MST 2014
You said, you are using Ubuntu 12.04. The installation instructions give two Ubuntu scenarios: "Ubuntu 13.10 or later", and "Ubuntu 13.04 or earlier". So, why have you followed the instructions for the wrong version? To be clear: you are running Ubuntu 12.04, so follow the instructions for Ubuntu 13.04 and earlier!

If you follow the correct instructions, your product will work.

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:13 GMT

Content originally posted in LPCWare by HRE Haustechnik on Wed Jun 18 07:24:04 MST 2014
Thank you fore your help

the Ubuntu 13.xx and earlier i installed also and is the actuell version. Tommorrow morning the LPCLink2 worked one time. second time not. The same fault eapiered. Have i installed too much that it mess around.

Once again thank you very much

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:13 GMT

Content originally posted in LPCWare by lpcxpresso-support on Wed Jun 18 07:27:52 MST 2014
Which fault? Please explain EXACTLY the error message.

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:14 GMT

Content originally posted in LPCWare by HRE Haustechnik on Thu Jun 19 22:42:20 MST 2014
Thank you fore your answer

if i right remember the first where target returned Error 0x4..... and the second was a weak power supply that i fixed already. After i fixed the power problem i tried to make a Debugg session and hear the first problem apppeard.

On my notebook i installed LPCXpresso IDE 7.2.0. Today i make trie with the notebook and i hope it works. If it works my problems are gone and i will let you know.

Thanks a lot

Best Regards

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:15 GMT

Content originally posted in LPCWare by lpcxpresso-support on Thu Jun 19 23:59:21 MST 2014
Sorry, but 'guessing' what errors you received are not sufficient. If I am to help you, I need to know the EXACT error message(s).

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:15 GMT

Content originally posted in LPCWare by HRE Haustechnik on Tue Jun 24 03:33:13 MST 2014
Hallo i downloaded LPCXpresso IDE 7.2.0 on my notebook. On the notebook is UBUNTU 12.04 LTS Every think i made new. here is the Terminal output: anna@ubuntu:/lib/i386-linux-gnu$ sudo ln -sf libudev.so.1 libudev.so.0
[sudo] password for anna:
anna@ubuntu:/lib/i386-linux-gnu$ sudo ln -sf libudev.so.1 libudev.so.0
anna@ubuntu:/lib/i386-linux-gnu$
anna@ubuntu:/lib/i386-linux-gnu$ cd
anna@ubuntu:~$ sudo apt-get install libusb-0.1-4:i386 # Ubuntu
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
libusb-0.1-4:i386 ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
anna@ubuntu:~$ sudo apt-get install libusb-0.1-4:i38
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
E: Paket libusb-0.1-4:i38 kann nicht gefunden werden
E: Mittels regulärem Ausdruck »libusb-0.1-4« konnte kein Paket gefunden werden
anna@ubuntu:~$ sudo apt-get install libusb-0.1-4:i38
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
E: Paket libusb-0.1-4:i38 kann nicht gefunden werden
E: Mittels regulärem Ausdruck »libusb-0.1-4« konnte kein Paket gefunden werden no package found

When i connect the LPCLink2 to USB-port Terminal is Bevor Debug: Bus 002 Device 010: ID 1fc9:000c NXP Semiconductors
After Debug: Bus 002 Device 011: ID 21bd:0006
And in the Debug Link connect Window : Cannot connect to the server process: redlinkserv (port:3025)

I did what i could but i come not further can anybody help me to run the Debug launch

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:16 GMT

Content originally posted in LPCWare by lpcxpresso-support on Tue Jun 24 03:54:00 MST 2014
In a terminal window, please type the following

strace /usr/local/lpcxpresso_[your_version]/lpcxpresso/bin/redlinkserv

and post the output.

[Note: If strace is not installed, please install it]

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:17 GMT

Content originally posted in LPCWare by HRE Haustechnik on Tue Jun 24 07:06:45 MST 2014
Hallo
here is theTerminal output: anna@ubuntu:~$ strace/usr/lpcxpresso_[7.2.0]/lpcxpresso/bin/redLinkserv
bash: strace/usr/lpcxpresso_[7.2.0]/lpcxpresso/bin/redLinkserv: Datei oder Verzeichnis nicht gefunden (file ore index not found)
anna@ubuntu:~$
Thanks lot for the quick help

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:17 GMT

Content originally posted in LPCWare by lpcxpresso-support on Tue Jun 24 07:16:00 MST 2014
Well, you did a few things wrong there. You should have been able to work that out from the message.

1. There is a space between "strace" and the rest of the line
2. use the correct directory for where you installed LPCXpresso. It is unlikely to have "[" and "]" in the directory name
3. Why did you add a capital letter in redLinkserv?

i.e. assuming you installed in the the standard location, you should have typed:

strace /usr/local/lpcxpresso_7.2.0_153/lpcxpresso/bin/redlinkserv

BUT CHECK THE INSTALLATION DIRECTORY!!!

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:18 GMT

Content originally posted in LPCWare by HRE Haustechnik on Tue Jun 24 22:08:19 MST 2014
Hallo
so i did it now right and here is the Terminal output:stat64("/usr/lib/tls/sse2", 0xffc49250) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/cmov/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/cmov", 0xffc49250) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls", 0xffc49250)      = -1 ENOENT (No such file or directory)
open("/usr/lib/i686/sse2/cmov/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/i686/sse2/cmov", 0xffc49250) = -1 ENOENT (No such file or directory)
open("/usr/lib/i686/sse2/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/i686/sse2", 0xffc49250) = -1 ENOENT (No such file or directory)
open("/usr/lib/i686/cmov/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/i686/cmov", 0xffc49250) = -1 ENOENT (No such file or directory)
open("/usr/lib/i686/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/i686", 0xffc49250)     = -1 ENOENT (No such file or directory)
open("/usr/lib/sse2/cmov/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/sse2/cmov", 0xffc49250) = -1 ENOENT (No such file or directory)
open("/usr/lib/sse2/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/sse2", 0xffc49250)     = -1 ENOENT (No such file or directory)
open("/usr/lib/cmov/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/cmov", 0xffc49250)     = -1 ENOENT (No such file or directory)
open("/usr/lib/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=33792, ...}) = 0
munmap(0xf7726000, 97585)               = 0
munmap(0xf751b000, 255240)              = 0
write(2, "Could not load redlink shared ob"..., 37Could not load redlink shared object
) = 37
exit_group(1)                           = ?
anna@ubuntu:~$
These are the last lines if you need the wole Output i will send it with pleasure.
Thank you fore your help

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:19 GMT

Content originally posted in LPCWare by lpcxpresso-support on Wed Jun 25 00:43:56 MST 2014
Somehow you have managed to delete libudev.so., which is a standard part of an Ubuntu installation.

You will need to reinstall this file for redlinkserv to run.

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:20 GMT

Content originally posted in LPCWare by HRE Haustechnik on Wed Jun 25 06:03:54 MST 2014
Hallo
here is the Terminal output for lsusb:Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 05c8:030e Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 004: ID 1690:0741 Askey Computer Corp. [hex]
Bus 002 Device 003: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 002 Device 004: ID 1fc9:000c NXP Semiconductors (here the LPCLink2 is connected, after boot redlink it shuts of)
anna@ubuntu:~$
My question what link fails and how to manage the fault
Thank a lot

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:22 GMT

Content originally posted in LPCWare by lpcxpresso-support on Wed Jun 25 06:23:00 MST 2014
I told you what is wrong. You have deleted libudev.so.1. It has nothing to do with the USB ports or connections.

To solve your problem, you need to restore libudev.so.1

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:24 GMT

Content originally posted in LPCWare by HRE Haustechnik on Wed Jun 25 06:27:28 MST 2014
Hallo
i am not the PC Spezialist. Please let me know how i can restore libudev.so.1
Thanks alot for your great help

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:25 GMT

Content originally posted in LPCWare by TheFallGuy on Wed Jun 25 07:29:42 MST 2014
Try typing this *exactly* as provided:

sudo sh -c "cd /lib/i386-linux-gnu/ && ln -sf /lib/i386-linux-gnu/libudev.so.0.13.0 libudev.so.1"

Note: This is all on one single line, but may display as wrapped in your browser.

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:25 GMT

Content originally posted in LPCWare by starblue on Thu Jun 26 00:37:57 MST 2014
According to the strace output it doesn't even search in /lib/i386-linux-gnu, only in /usr/lib and subdirectories (unless there's some symbolic link from /usr/lib to /lib, which we can't see).

Re: LPC Link2

lpcware — Thu, 16 Jun 2016 02:02:26 GMT

Content originally posted in LPCWare by TheFallGuy on Thu Jun 26 01:02:53 MST 2014
He didn't post the entire trace. On Ubuntu, it DOES search /lib/i386-linux-gnu