LPC FAQsのトピックIn the case where a UART Framing error occurs, is it possible to Reset/Restart the UART core after detecting this Framing error? https://community.nxp.com/t5/LPC-FAQs/In-the-case-where-a-UART-Framing-error-occurs-is-it-possible-to/m-p/467006#M97 <HTML><HEAD></HEAD><BODY><P><SPAN style="color: #646464; font-family: Arial, sans-serif; font-size: 12px;">When a Framing error occurs, there is no way to reset/restart the UART state machine. Ideally, the best way to act upon this situation would be cleaning the FIFO up, and wait until an idle line is detected. After this, reception would continue normally.</SPAN></P></BODY></HTML> Thu, 31 Mar 2016 14:40:38 GMT lpcware-support 2016-03-31T14:40:38Z In the case where a UART Framing error occurs, is it possible to Reset/Restart the UART core after detecting this Framing error? https://community.nxp.com/t5/LPC-FAQs/In-the-case-where-a-UART-Framing-error-occurs-is-it-possible-to/m-p/467006#M97 <HTML><HEAD></HEAD><BODY><P><SPAN style="color: #646464; font-family: Arial, sans-serif; font-size: 12px;">When a Framing error occurs, there is no way to reset/restart the UART state machine. Ideally, the best way to act upon this situation would be cleaning the FIFO up, and wait until an idle line is detected. After this, reception would continue normally.</SPAN></P></BODY></HTML> Thu, 31 Mar 2016 14:40:38 GMT https://community.nxp.com/t5/LPC-FAQs/In-the-case-where-a-UART-Framing-error-occurs-is-it-possible-to/m-p/467006#M97 lpcware-support 2016-03-31T14:40:38Z