lpc11c24 on-chip drivers exception

lpcware — Wed, 15 Jun 2016 19:30:02 GMT

Content originally posted in LPCWare by nickich on Mon Jul 06 07:05:35 MST 2015
Hello,

I'm getting HardFault exception when the fourth CAN message appear on the bus.
The stack:
Thread #1 <main> (Suspended : Signal : SIGSTOP:Stopped (signal))
HardFault_Handler() at cr_startup_lpc11xx.c:706 0xd6
<signal handler called>() at 0xfffffff1
0x887766
0x1fff2c1e

It looks it's something inside the ROM drivers. Is there any way to debug this?
What could cause it?

First 3 CAN messages are received OK. When the 4th message appears on the bus the LPC throws this exception. Even the CAN ISR (CAN_rx() ) doesn't get called.

Regards,

Re: lpc11c24 on-chip drivers exception

lpcware — Wed, 15 Jun 2016 19:30:03 GMT

Content originally posted in LPCWare by nickich on Mon Jul 06 07:34:58 MST 2015
...the RAM allocated for the ROM drivers... ;-)

topic lpc11c24 on-chip drivers exception in LPC Microcontrollers

lpc11c24 on-chip drivers exception

Re: lpc11c24 on-chip drivers exception