LPC MicrocontrollersのトピックRe: LPC1343 Getting Started https://community.nxp.com/t5/LPC-Microcontrollers/LPC1343-Getting-Started/m-p/525034#M7670 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by mc on Sat Aug 24 10:41:29 MST 2013</STRONG><BR /><SPAN>Hi darsh,</SPAN><BR /><SPAN>You can use IDE of your choice but want point out that LPCXpressso is free up to 128KB. IT uses GNU tool chain.</SPAN><BR /><SPAN>Therefore I recommended LPCXpresso.</SPAN><BR /><BR /><SPAN>Regards,</SPAN><BR /><SPAN>MC</SPAN></BODY></HTML> Wed, 15 Jun 2016 16:54:05 GMT lpcware 2016-06-15T16:54:05Z LPC1343 Getting Started https://community.nxp.com/t5/LPC-Microcontrollers/LPC1343-Getting-Started/m-p/525033#M7669 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by darsh.jp@gmail.com on Fri Aug 23 22:37:32 MST 2013</STRONG><BR /><SPAN>Hiii</SPAN><BR /><BR /><SPAN>I am New to LPCxxxx. I have purchased LPC1343 from NGX Tech. board is mx-lpc1343-s. There are number of IDEs available like LPCXpresso, CoIDE, Keil, etc.. Which Should I use?? I want to study USB-HID on this board.</SPAN></BODY></HTML> Wed, 15 Jun 2016 16:54:04 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC1343-Getting-Started/m-p/525033#M7669 lpcware 2016-06-15T16:54:04Z Re: LPC1343 Getting Started https://community.nxp.com/t5/LPC-Microcontrollers/LPC1343-Getting-Started/m-p/525034#M7670 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by mc on Sat Aug 24 10:41:29 MST 2013</STRONG><BR /><SPAN>Hi darsh,</SPAN><BR /><SPAN>You can use IDE of your choice but want point out that LPCXpressso is free up to 128KB. IT uses GNU tool chain.</SPAN><BR /><SPAN>Therefore I recommended LPCXpresso.</SPAN><BR /><BR /><SPAN>Regards,</SPAN><BR /><SPAN>MC</SPAN></BODY></HTML> Wed, 15 Jun 2016 16:54:05 GMT https://community.nxp.com/t5/LPC-Microcontrollers/LPC1343-Getting-Started/m-p/525034#M7670 lpcware 2016-06-15T16:54:05Z