topic CDC and welcome message in LPC Microcontrollers https://community.nxp.com/t5/LPC-Microcontrollers/CDC-and-welcome-message/m-p/524017#M6653 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by fjarnjak on Tue Feb 19 10:38:40 MST 2013</STRONG><BR /><SPAN>Hello, </SPAN><BR /><BR /><SPAN>I am trying to output a welcome message when a client connects using virtual com port (CDC). What callback should I implement?</SPAN><BR /><SPAN>VBUS detects if cable is connected, there are others when device is enumerated, etc. but I need to detect succesfull com port connection from the client terminal every time it occurs to show my message. </SPAN><BR /><SPAN>I have been searching this forum, but I couldn't find anything. Any experience?</SPAN><BR /></BODY></HTML> Wed, 15 Jun 2016 16:47:47 GMT lpcware 2016-06-15T16:47:47Z CDC and welcome message https://community.nxp.com/t5/LPC-Microcontrollers/CDC-and-welcome-message/m-p/524017#M6653 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by fjarnjak on Tue Feb 19 10:38:40 MST 2013</STRONG><BR /><SPAN>Hello, </SPAN><BR /><BR /><SPAN>I am trying to output a welcome message when a client connects using virtual com port (CDC). What callback should I implement?</SPAN><BR /><SPAN>VBUS detects if cable is connected, there are others when device is enumerated, etc. but I need to detect succesfull com port connection from the client terminal every time it occurs to show my message. </SPAN><BR /><SPAN>I have been searching this forum, but I couldn't find anything. Any experience?</SPAN><BR /></BODY></HTML> Wed, 15 Jun 2016 16:47:47 GMT https://community.nxp.com/t5/LPC-Microcontrollers/CDC-and-welcome-message/m-p/524017#M6653 lpcware 2016-06-15T16:47:47Z Re: CDC and welcome message https://community.nxp.com/t5/LPC-Microcontrollers/CDC-and-welcome-message/m-p/524018#M6654 <HTML><HEAD></HEAD><BODY><STRONG>Content originally posted in LPCWare by tuong on Tue Mar 05 20:17:23 MST 2013</STRONG><BR /><SPAN>Hi,</SPAN><BR /><BR /><SPAN>From my limited exprerience, a successfull com port connection is claimed after host(your PC) sends a SET_LineEndcoding request. So you may start with the function EVENT_CDC_Device_LineEncodingChanged()!</SPAN><BR /><BR /><SPAN>With best regards,</SPAN></BODY></HTML> Wed, 15 Jun 2016 16:47:48 GMT https://community.nxp.com/t5/LPC-Microcontrollers/CDC-and-welcome-message/m-p/524018#M6654 lpcware 2016-06-15T16:47:48Z