topic Re: LPC54605 ISP UART in LPC Microcontrollers

LPC54605 ISP UART

Mateusz_K — Thu, 16 Jan 2025 09:41:35 GMT

I am using ISP through UART on LPC54605. I follow the procedure described in the User Manual, that is:

- send synchronization char

- send "Synchronized\r\n"

- send freq

After all this commands I am getting expected response. How ever, when I send Unlock command I am receiving ERR_ISP_PARAM_ERROR return code. Unlock commands which I am sending is structured as:

"U 23130\r\n"

Procedure, which I am using works on other LPC devices, such as LPC11Axx.

Re: LPC54605 ISP UART

Pavel_Hernandez — Thu, 16 Jan 2025 20:43:39 GMT

Hello, my name is Pavel, and I will be supporting your case, is there a possibility that your device is locked, could you try to use the SPSDK and on this use BLHOST to read if the flash is lock.

Installation Guide — SPSDK documentation

Best regards,
Pavel

Re: LPC54605 ISP UART

Mateusz_K — Wed, 29 Jan 2025 09:48:33 GMT

I won't install it, but I am sure that device is not locked. ECRP region in flash is empty, I can reprogram and erase the device using SWD

Re: LPC54605 ISP UART

Mateusz_K — Wed, 29 Jan 2025 10:43:33 GMT

I mean, I will try to install it, meanwhile: UART communication looks like this