LPC MicrocontrollersのトピックFreeRTOS compilation failure

FreeRTOS compilation failure

sushmasan — Thu, 03 Oct 2024 14:37:00 GMT

Hello Team,

I am trying to build FreeRTOS module using MCUXpresso IDE, but the build is failing.

All the respective header files exist in the stack. The header file path is set in the includes.

"portmacrocommon.h" is already present in this path "freertos\freertos-kernel\portable\GCC\ARM_CM33_NTZ\non_secure"

Please find the snapshots below for your reference.

Can someone please let us know, what is still missing?

Re: FreeRTOS compilation failure

sushmasan — Tue, 08 Oct 2024 14:52:06 GMT

Hello Team,

Can someone please check this error?

Regards,

San

Re: FreeRTOS compilation failure

andrewsglenn — Wed, 09 Oct 2024 03:50:05 GMT

What happens if you set the path in the Includes tab of "Properties->C/C++ General->Paths and Symbols" ?

Re: FreeRTOS compilation failure

Harry_Zhang — Wed, 09 Oct 2024 08:12:27 GMT

Hi @sushmasan

Sometimes, using relative paths can cause issues. As a test, try adding the absolute path to the non_secure folder containing portmacrocommon.h directly in your project settings to rule out any issues with relative paths.

If your problem has not been resolved, can you share your project？

Hang

Re: FreeRTOS compilation failure

sushmasan — Wed, 09 Oct 2024 21:07:28 GMT

Even after setting the path in this location, still there is no change in the behavior, I am getting the same error.

Re: FreeRTOS compilation failure

sushmasan — Wed, 09 Oct 2024 21:10:13 GMT

Hi @Harry_Zhang ,

I set the complete the filesystem path, but still I am getting the same error.

Please find the attached my project.

Regards,

San

Re: FreeRTOS compilation failure

Harry_Zhang — Thu, 10 Oct 2024 07:49:16 GMT

Hi @sushmasan

I import your project into my MCUXpresso IDE, and i haven't made any changes,

I compiled without any errors.

So I suggest you delete this workspace and create a new one.

Hang

Re: FreeRTOS compilation failure

sushmasan — Thu, 10 Oct 2024 14:35:59 GMT

Hi @Harry_Zhang ,

I am seeing few changes in your code, but you mentioned my workspace was directly imported and built without any issues.

Can you please share the workspace you created just to make sure?

One more thing, while creating the workspace for FreeRTOS, what are all the components you picked from SDK, in order to build it without errors?

Regards,
San

Re: FreeRTOS compilation failure

Harry_Zhang — Sat, 12 Oct 2024 02:34:14 GMT

Hi @sushmasan

I mean that change the MCUxpresso workspace, not the workspace for FreeRTOS.

When you open the MCUXpresso, It will prompt you to choose a workspace.

You can create a new workspace.

Hang

Re: FreeRTOS compilation failure

sushmasan — Thu, 17 Oct 2024 16:42:16 GMT

Finally, I was able to compile the FreeRTOS component.