No such file or directory

chuandaoxy — Sun, 19 May 2024 09:48:11 GMT

I'm compiling lpc810 code by MCUXpresso IDE v11.5.1 ,The compilation result is shown in Fig

#include <core_cmInstr.h> It's already been added，anyone tell me where the path should be added

thank you

Re: No such file or directory

Harry_Zhang — Mon, 20 May 2024 08:06:16 GMT

You need to add the path of the core_cmInstr. h file to the project settings of MCUXpress IDE v11.5.1. The specific operation steps are as follows:

1 Open MCU Xpress IDE v11.5.1.
2 In the Project Browser, right-click on your project and select "Properties".
3 In the pop-up properties window, select "C/C++Build" ->"Settings" ->"MCU Settings" ->"Include Paths".
4 Click the "Add" button, then enter the path where the core_cmInstr. h file is located in the pop-up dialog box, and click "OK".
5 Click the "Apply" button, then click the "Close" button to close the properties window.
Recompile the project.
In this way, the path to the core_cmInstr. h file has been added to the project, and it should be found during compilation.

Hope this will help you.

Hang

topic No such file or directory in LPC Microcontrollers

No such file or directory

Re: No such file or directory