LPC MicrocontrollersのトピックRe: LPC824 Target board

LPC824 Target board

Vishal_AVG — Thu, 21 Sep 2023 06:21:21 GMT

I am Multilink Universal Rev A to program LPC824 target board in MCUXpresso 11.3 IDE but error shows

This hardware interface is an older model and does not support this device.

Please let me know what should I do?

Re: LPC824 Target board

xiangjun_rong — Thu, 21 Sep 2023 09:04:00 GMT

Hi,

You do not write anything, what question do you have?

XiangJun Rong

Re: LPC824 Target board

frank_m — Thu, 21 Sep 2023 09:08:23 GMT

I suppose this is a NXP website issue.

This is what I saw - after opening the "spoiler" tab.

Re: LPC824 Target board

Vishal_AVG — Thu, 21 Sep 2023 09:23:10 GMT

I am using 'Multilink Universal Rev A' to program LPC824 target board in MCUXpresso 11.3 IDE but error shows

"This hardware interface is an older model and does not support this device." This is error I found.

Please let me know what should I do?

Re: LPC824 Target board

Vishal_AVG — Thu, 21 Sep 2023 09:25:42 GMT

Can I program(SWD) LPC824 using MCU-Link Debug Probe?

Re: LPC824 Target board

xiangjun_rong — Fri, 22 Sep 2023 01:28:15 GMT

Hi,

Pls refer to the link, which lists the target MCU the device supports.

https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/mcu-link-debug-probe:MCU-LINK

The website lists that the MCU-Link device supports LPC824.

Hope it can help you

XiangJun Rong