LPC MicrocontrollersのトピックRe: Hard fault on LPCXpresso845MAX

Hard fault on LPCXpresso845MAX

Jason_fx — Wed, 06 Sep 2023 05:42:45 GMT

During the development process of my IDE, a Hard fault suddenly occurred, and the program could not be executed. I tried using the example code, but the same Hard fault occurred, Can get me any debug suggestions?

Re: Hard fault on LPCXpresso845MAX

Alice_Yang — Wed, 06 Sep 2023 07:11:45 GMT

Hello @Jason_fx

Please try to enter ISP mode, try to full erase your chip, then re-debug.

If still can not work, tell me which IDE do you used? How about test with MCUxpresso IDE?

Check whether can enter ISP mode use Flash Magic.

Alice

Re: Hard fault on LPCXpresso845MAX

Jason_fx — Wed, 06 Sep 2023 07:55:22 GMT

How to enter ISP mode?
I use IDE is MCUXpresso IDE.

I use the following method to perform flash erase, but the result is still not working

Debug setting -> GUI Flash Tool -> Erase -> Mass erase -> Run -> MassErase completed

Re: Hard fault on LPCXpresso845MAX

Alice_Yang — Thu, 07 Sep 2023 07:02:06 GMT

Hello @Jason_fx

Pressing SW1 when power-up or reset.

You can try to keep pressing when you do your steps "Debug setting -> GUI Flash Tool -> Erase -> Mass erase -> Run -> MassErase completed".

Alice

Re: Hard fault on LPCXpresso845MAX

Jason_fx — Thu, 07 Sep 2023 07:20:33 GMT

Hi @Alice_Yang

Thanks for the advice, I tried it and nothing changed.
And a new error popped up.

The following is the error message, I confirmed Windows has found boards.

Failed on connect: Ee(42). Could not connect to core.

No connection to chip's debug port

Re: Hard fault on LPCXpresso845MAX

Alice_Yang — Thu, 07 Sep 2023 07:27:47 GMT

Hello @Jason_fx

"I confirmed Windows has found boards."

-> I think windows just fund debugger.

If ISP mode also failed, I think the chip broken. You can download Flash Magic, then try to whether can connect using ISP mode.

Download Flash Magic from: https://www.flashmagictool.com/download.html

Alice