LPC MicrocontrollersのトピックRe: LPCpresso43S67: No compatible emulator available

LPCpresso43S67: No compatible emulator available

ZJane — Wed, 14 Jun 2023 15:41:36 GMT

The board make DFU link and J5 USB connector.

No device were found in the device manager , and cannot be detected in debugger.

system: win11; development board:LPC43S67

Re: LPCpresso43S67: No compatible emulator available

Pavel_Hernandez — Wed, 14 Jun 2023 20:45:22 GMT

Hello, my name is Pavel, and I will be supporting your case, I review your case I do not if your problem is the debugger on the board or win11, the issues with win11 are not a priority.

Try with HOST DEVICE DRIVERS

LPCXpresso43S67 Development Board | NXP Semiconductors

Try too update the debugger on the board with J-link.

LPCScrypt v2.1.2 | NXP Semiconductors

LPC-Link2 Debug Probe Firmware Programming (nxp.com)

Best regards,
Pavel

Re: LPCpresso43S67: No compatible emulator available

ZJane — Thu, 15 Jun 2023 05:50:44 GMT

I installed the host driver and update the Jlink driver.

file1: lpc_driver_setup.exe

file2: JLink_Windows_V788g_i386.exe

It doesn't work.

Re: LPCpresso43S67: No compatible emulator available

Pavel_Hernandez — Thu, 15 Jun 2023 20:37:07 GMT

Hello, could you update the firmware of your debugger on the board?

LPCScrypt v2.1.2 | NXP Semiconductors

You will need to put the board in DFU mode Device Firmware Update.

Best regards,
Pavel